Ganos Fault, Microearthquake, Fault Zone Waves, Moment Tensor Analysis
Abstract:
The Monitoring of the Ganos Fault data presents significant opportunities and challenges for earthquake detection, location and magnitude calculations, source mechanism solutions, and discovery of fault zone waves. This study indicates mostly of preliminary data analysis and seismological evaluations. While narrow distance aperture installation has an opportunity to detect microearthquakes, it also causes significant difficulties in determining the source parameters of micro-earthquakes. Extracting microearthquakes from continuous data shows that special strategies need to be used. MONGAN data revealed the presence of many earthquakes with magnitude M<1.0 in the study region. These earthquakes are mostly out of network earthquakes and it is very difficult to obtain reliable solutions due to the insufficient azimuthal distribution of the stations. It is obvious that different network techniques and wave particle motion analyzes are contributed to the location and source parameters. Although the fault zone structure consists of two different lithologies that make significant differences in seismic wave phase arrival times and wave amplitudes, we observe fault zone head waves on both sides along the Ganos fault. Moment tensor analyzes depict that reliable source mechanism solutions can be obtained using a small number of station records.
Mustafa Kemal ÖZKAN, Metin BEYAZPİRİNÇ, Ali Ekber AKÇAY, Muhamed ÇOBAN, Osman CANDAN, Osman Ersin KORALAY, Meftun Kerem SÖNMEZ, Halil YUSUFOĞLU
Indexed In · Volume 170 / April 2023
Stratigraphy of the metamorphic rocks of Niğde Massif and new evidence of Triassic rifting of the Inner Tauride Ocean (Central Anatolia, Türkiye)
Authors:
Mustafa Kemal ÖZKAN, Metin BEYAZPİRİNÇ, Ali Ekber AKÇAY, Muhamed ÇOBAN, Osman CANDAN, Osman Ersin KORALAY, Meftun Kerem SÖNMEZ, Halil YUSUFOĞLU
ABSTRACT
Metamorphites of Niğde Massif, which form the basis of the study area covering the Niğde vicinity in Central Anatolia, are composed of Late Devonian Gümüşler, Carboniferous-early Permian Kaleboynu late Permian Kızıldağ formation and unconformable Triassic-Late Cretaceous cover units from bottom to the top, which are separated from each other with unconformities. The Triassic succession (Söğütlüdere formation) of phyllite-marble-schist alternations with common amphibolite levels is first distinguished in this study, unconformably overlies the Paleozoic succession. Thick homogeneous marbles of Jurassic-Cretaceous period, is defined by quartzite at the bottom representing the unconformity at the base, is defined as the Kırtepe formation. The succession probably ends with the Late Cretaceous metaflysch (Kırkpınar formation) constituting metaophiolite blocks with unconformable contact relationships. Amphibolite sample of the Söğütlüdere formation gives 239 Ma (Middle Triassic) age, which is interpreted as the crystallization age of the primary basic magmatism. The youngest detrital zircon ages (223-224 Ma) obtained from the metaclastics of the same formation shows that the primary deposition age of the formation is probably Late Triassic, which is consistent with this data. Geochemical data indicate an extensional environment of the alkaline composition and anorogenic originated basic volcanism developed on the continental crust. When these results evaluated together with the regional data, the metabasites of the Söğütlüdere formation can be interpreted as the first phase products of rifting, which commenced with the rifting process of the Tauride-Anatolide Platform in the Triassic period and resulted in the opening of the Inner Tauride Ocean and the break off the Kırşehir Block.
The importance of Confocal Raman Spectroscopy and mineral chemistry studies in the magma crystallization processes: Strandja Intrusives, NW Türkiye
Authors:
Ezgi ULUSOY, Yusuf Kağan KADIOĞLU
ABSTRACT
The Strandja Massif cropping out in NW Turkey is cut by Late Cretaceous intrusives. These are called Strandja Intrusives and they are felsic and mafic coeval intrusives. Felsic intrusives consist of granite, granodiorite, quartz monzonite and syenite, while mafic intrusives consist of diorite and gabbro composition. Main composition of felsic intrusives consists of quartz, alkali feldspar, plagioclase, biotite, amphibole ±pyroxene mineral association, while main composition of mafic ones consists of plagioclase, biotite, amphibole ±pyroxene ±olivine mineral association. Amphiboles hydrated double-chain mineral of the Strandja Intrusives observed in all rocks used as an index mineral in this study to understand the petrological evolution of the rocks. According to Confocal Raman Spectroscopy studies amphiboles were actinolite type and exhibited similar spectrum and results of mineral chemistry reveals that they were calcic/Mg-hornblende types. According to geothermobarometer calculations, amphiboles crystallize in felsic intrusives at a pressure range of 0.49-0.94 kbar and a temperature of 757.52-814.49oC temperature at a depth of approximately 1.34-4.93 km, while in mafic ones at 2.59 kbar pressure and 892.82oC temperature at 9.97 km depth. Different temperatures-depth conditions and overlaps in Raman shift obtained from amphiboles indicate that these intrusives are derived from different sources but crystallized in the same environment.
Keywords:
Amphibole, Strandja Intrusives, Confocal Raman Spectroscopy, Mineral Chemistry, Geothermobarometry
Recep GÜNEY, Zeynep Rezzan ÖZERK, Erdener IZLADI, Salih ERDEN, Esra AK, Erdi APATAY, Erdoğan ERYILMAZ, Batuğhan YIKMAZ, Sami Aytaç ÖZDEMİR, Sermet GÜNDÜZ, Tuğçe CAN, İmam ÇELİK, Abdullah GÜRER, Sinem AYKAÇ, Muzaffer Özgü ARISOY, Esra Burcu KÖSE, Büşra Bihter DEMİRCİ
Indexed In · Volume 170 / April 2023
Evaporate salt exploration by two dimensional (2D) seismic reflection method: Ankara- Polatlı region, Türkiye
Authors:
Recep GÜNEY, Zeynep Rezzan ÖZERK, Erdener IZLADI, Salih ERDEN, Esra AK, Erdi APATAY, Erdoğan ERYILMAZ, Batuğhan YIKMAZ, Sami Aytaç ÖZDEMİR, Sermet GÜNDÜZ, Tuğçe CAN, İmam ÇELİK, Abdullah GÜRER, Sinem AYKAÇ, Muzaffer Özgü ARISOY, Esra Burcu KÖSE, Büşra Bihter DEMİRCİ
ABSTRACT
The presence of the evaporate salt zone in Ankara-Polatlı region has been determined by the drillings. It is thought to be the largest reserve in Türkiye. The seismic reflection method was used to determine the top-bottom levels of the zone; its depth; its thickness and extent boundaries; the horstgraben structures; base depth and tectonic movements affecting the study area. Data were collected on three seismic lines. The near-surface tomographic velocity sections were compatible with the top-of-the-zone depth observed in the drillings. As a result of the study, the depth and thickness of the top-bottom of the zone were determined along the lines. Within the scope of the study, a combined interpretation was made on the lines by using gravity and seismic data. The extent of the ore zone was determined only in the E-W direction section, but not in the north-south direction lines since they are outside the license area and the seismic lines. The closest point of the evaporate zone to the surface is approximately 150 m, the deepest point is approximately 310 m, the average thickness is
approximately 100 m and the maximum thickness is 185 m.