In this study, the production technology of barite, fluorite, rare-earth elements, and thorium-bearing rare-earth oxides from the Eskişehir-Beylikova were investigated, and the processes that can be used in the production of thorium-free mixed rare earth oxides were tested. The applied processes are roasting, leaching, solvent extraction and precipitation methods, respectively. After all studies, the optimum roasting temperature and roasting duration are determined as 600 °C and 1 hour. In the extraction stage, the highest leaching efficiency is achieved with 5 M HCl, 1-hour leaching duration, 1/3 solid/liquid ratio and 35 °C leaching temperature. While methyl tri C8-C10 ammonium chloride (Adogen 464) is used for the removal of iron from produced solution, di-(2-ethylhexyl) phosphoric acid (D2EHPA) is used for the removal of thorium. As a result of solvent extraction studies, the solution containing rare earth elements is precipitated under optimum conditions. After precipitation, the product contains 99.65% rare earth oxides.
Geophysical Inversion and modelling, Ore Geology · Volume 178 / December 2025 · Pages: 149-181
Okan PULAT, Murat KIRTIL, Mustafa KARAKAŞ, Mustafa KÜÇÜK, Ahmet Mert ULUTAŞ, Murat AKGÖZ, Ali Tuğcan ÜNLÜER, Hülya ATEŞ, Mehmet Burak OMAÇ, Özkan TÜRKAN
Indexed In · Volume 178 / December 2025
Geochemical and geophysical relationship of the potassium-rich fenite zone in surface and subsurface investigations of the giant Kuluncak (Malatya) Nb-U-REE-Zr-Li mineralization
Authors:
Okan PULAT, Murat KIRTIL, Mustafa KARAKAŞ, Mustafa KÜÇÜK, Ahmet Mert ULUTAŞ, Murat AKGÖZ, Ali Tuğcan ÜNLÜER, Hülya ATEŞ, Mehmet Burak OMAÇ, Özkan TÜRKAN
ABSTRACT
The Kuluncak (Malatya) district hosts one of the most significant Nb–U–REE–Zr–Li mineralizations in Türkiye, spatially associated with alkaline and carbonatite-related rocks. In this study, geochemical and geophysical investigations were integrated with surface and drillhole data to evaluate the role of fenitization in rare earth element enrichment. The drillhole profiles reveal systematic variations: in marble-hosted sections, light rare earth element (LREE) anomalies occur near-surface zones coupled with K2O enrichment, whereas in nepheline syenite-hosted drillholes, REE anomalies are concentrated at intermediate depths (~40–100 m) with heterogeneous distributions. High CaO concentrations, together with fluorite, barite, apatite, and Nb–REE-bearing minerals, confirm a strong carbonatitic contribution. Geophysical anomalies (spectral gamma, magnetic maps) support the geochemical evidence and were used to identify subsurface fenite zones. Comparison with other carbonatite-related systems in Türkiye, such as the Özvatan complex (Kayseri) and Eskişehir, indicates that Kuluncak represents one of the most carbonatite-dominant and LREE-enriched systems in the region. On a global scale, the geochemical features of Kuluncak resemble world-class deposits such as Bayan Obo (China) and Ilímaussaq (Greenland). These findings demonstrate that fenitization and carbonatite-related metasomatism are the principal processes controlling mineralization, highlighting the Kuluncak district as a strategic Nb–REE resource of both national and international importance.
Rare earth elements · Volume 178 / December 2025 · Pages: 130-148
Berna YAVUZ PEHLIVANLI, Menevşe ALTAN
Indexed In · Volume 178 / December 2025
Rare Earth Element Potentials of Red-Colored Eocene Kazmaca and Late Eocene–Early Miocene İncik and Bayındır Formations (Kırıkkale, Türkiye)
Authors:
Berna YAVUZ PEHLIVANLI, Menevşe ALTAN
ABSTRACT
Thered-colored sedimentary rocks of the Kazmaca, İncik, and Bayındır formations, particularly the red mudstones, exhibit noteworthy enrichment in Rare Earth Elements (REEs) and uranium. These finegrained units were deposited in low-energy lacustrine to shallow-marine environments, where redoxsensitive geochemical processes played a central role in elemental mobilization and accumulation. Mineralogical and geochemical analyses, including XRD, XRF, and ICP-MS, identified the uraniumbearing mineral Fourmarierite, confirming the presence of uranium mineralization. This finding is supported by elevated Cu/Al ratios, increased Fe concentrations, and trace-element distributions indicative of a redox-controlled diagenetic environment. The high Fe concentrations and Cu/Al ratiosact as geochemical proxies for REE-hosting phases. The depositional setting, characterized by low dissolved oxygen levels, likely reflects a warm and humid paleoclimate that enhanced chemical weathering and facilitated the mobilization and subsequent precipitation of uranium and REEs. Notably, dark-colored mudstone interbeds within the sandstone sequences exhibit localized uranium accumulation, which may represent precursor zones for secondary REE mineralization. These findings underscore the importance of redox conditions and climatic factors in controlling REE and uranium enrichment in red bed sequences. The presence of Fourmarierite, in conjunction with distinctive geochemical signatures, suggests a significant potential for REE exploration in these formations.
Keywords:
Rare Earth Elements (REEs), Fourmarierite, Red Sedimentary Rocks, Kazmaca Formation, İncik Formation, Bayındır Formation.
Mehmet ÇÖTELİ, Mustafa ALBAYRAK, Ufuk KİBAR, Arzu YAVUZ, Gülsüm TURGUT, Duran Serdar KARAHAN
Indexed In · Volume 176 / April 2025
Mineralogical examination of biomass ashes: A preliminary study for potassium enrichment and phosphoric acid (H3PO4) production
Authors:
Mehmet ÇÖTELİ, Mustafa ALBAYRAK, Ufuk KİBAR, Arzu YAVUZ, Gülsüm TURGUT, Duran Serdar KARAHAN
ABSTRACT
In this study, biomass fly ash was investigated and determined by XRD (XRay Diffractometer) to be predominantly langbeinite, aphthitalite, sylvine, apatite and hydroxyapatite. An alkaline leaching study was carried out on the material in a glass reactor at l/s ratio 4 temperature 60°C at pH 12.85 and after drying was analyzed by ICP (Inducted couple plasma). The crystal structure composition of K2SO4 72.28% and potassium content of 33.47% (w/w) was recovered. The elemental transformations in this leaching process were: K 74.16%, Mg 0.55% was found to be 0.8%. It was found that a minimum of 4.84 g H2SO4 per 100 g fly ash was required to precipitate the Ca(OH)2 migrated into the liquid solution and the overall leaching efficiency was found to be 29.85%. In the alkaline leaching process, potassium was found to be easily recovered from each biomass ash. By adding 40 g H2SO4/100 g biomass waste remaining after leaching, a phosphorus recovery of 74.9% was observed. In this preliminary study, unsatisfactory results were obtained in obtaining the industry standard H3PO4. The reason for this is that the Al, Mg and K in the fly ash are subject to selective dissolution as a result of working at high pH in the alkaline leaching process.
A new look at the origin of N-S trending young basins of western Anatolia
Authors:
Ömer Feyzi GÜRER
ABSTRACT
In the western Anatolia, the tectonic regime transitioned from crustal shortening to extension during Late Cenozoic time and evidence of this event was imprinted on basement lithologies and N-S and E-W oriented two distinct basin sub-types. Here, we examined the exhumation mechanism of the Menderes massif that forms the basement of these basins from a different perspective. The N-S oriented basins overlying different basement rock types were re-evaluated based on new evidence that has potential to put new constrains for interpreting the tectonic evolution of the area. Unroofing of the Menderes Massif must have developed due to compressional core complex. Per the model generated from our observations, we propose that the western Anatolia underwent a N-S contraction during the Early-Middle Miocene time. In this period from Marmara Sea at north to Mediterranean Sea at south, numerous basins, as in Gördes and Demirci, were bound by N-S oriented oblique faults. Evidence of contraction in the region during Early Middle Miocene time is understood by N-S oriented obique, strike-slip faults, folds, and reverse faults. Starting from the Plio-Quaternary time, the contractional regime was shifted to extension and ensuing E-W oriented grabens were formed in Gediz, Büyük Menderes, and Gökova. The structural deformation associated with these E-W oriented grabens are normal faults and related open folds. Geological evidence of multigeneration extension is recognized in the basins and basin-filling deposits throughout the Neogene to Quaternary time.
Keywords:
Western Anatolia, Late Cenozoic, Contractional Tectonic, N-S Basins, Neotectonic.
Recep GÜNEY, Zeynep Rezzan ÖZERK, Erdener IZLADI, Salih ERDEN, Esra AK, Erdi APATAY, Erdoğan ERYILMAZ, Batuğhan YIKMAZ, Sami Aytaç ÖZDEMİR, Sermet GÜNDÜZ, Tuğçe CAN, İmam ÇELİK, Abdullah GÜRER, Sinem AYKAÇ, Muzaffer Özgü ARISOY, Esra Burcu KÖSE, Büşra Bihter DEMİRCİ
Indexed In · Volume 170 / April 2023
Evaporate salt exploration by two dimensional (2D) seismic reflection method: Ankara- Polatlı region, Türkiye
Authors:
Recep GÜNEY, Zeynep Rezzan ÖZERK, Erdener IZLADI, Salih ERDEN, Esra AK, Erdi APATAY, Erdoğan ERYILMAZ, Batuğhan YIKMAZ, Sami Aytaç ÖZDEMİR, Sermet GÜNDÜZ, Tuğçe CAN, İmam ÇELİK, Abdullah GÜRER, Sinem AYKAÇ, Muzaffer Özgü ARISOY, Esra Burcu KÖSE, Büşra Bihter DEMİRCİ
ABSTRACT
The presence of the evaporate salt zone in Ankara-Polatlı region has been determined by the drillings. It is thought to be the largest reserve in Türkiye. The seismic reflection method was used to determine the top-bottom levels of the zone; its depth; its thickness and extent boundaries; the horstgraben structures; base depth and tectonic movements affecting the study area. Data were collected on three seismic lines. The near-surface tomographic velocity sections were compatible with the top-of-the-zone depth observed in the drillings. As a result of the study, the depth and thickness of the top-bottom of the zone were determined along the lines. Within the scope of the study, a combined interpretation was made on the lines by using gravity and seismic data. The extent of the ore zone was determined only in the E-W direction section, but not in the north-south direction lines since they are outside the license area and the seismic lines. The closest point of the evaporate zone to the surface is approximately 150 m, the deepest point is approximately 310 m, the average thickness is
approximately 100 m and the maximum thickness is 185 m.
Sinem AYKAÇ, Abdullah GÜRER, İmam ÇELİK, Batuğhan YIKMAZ, Erdoğan ERYILMAZ, Erdi APATAY, Sami Aytaç ÖZDEMİR, Sermet GÜNDÜZ, Tuğçe CAN, Esra AK, Erdener IZLADI, Salih ERDEN, Zeynep Rezzan ÖZERK, Recep GÜNEY, Esra Burcu KÖSE, Büşra Bihter DEMİRCİ
Indexed In · Volume 170 / April 2023
Determination of the coal-bearing zones and the alteration zones containing uranium ore by using two dimensional (2D) seismic reflection method in Thrace Basin
Authors:
Sinem AYKAÇ, Abdullah GÜRER, İmam ÇELİK, Batuğhan YIKMAZ, Erdoğan ERYILMAZ, Erdi APATAY, Sami Aytaç ÖZDEMİR, Sermet GÜNDÜZ, Tuğçe CAN, Esra AK, Erdener IZLADI, Salih ERDEN, Zeynep Rezzan ÖZERK, Recep GÜNEY, Esra Burcu KÖSE, Büşra Bihter DEMİRCİ
ABSTRACT
It is aimed to reveal the basement topography, the coal-bearing levels, the alteration zones containing uranium ore, and the tectonic structure prevailing by using two dimensional (2D) seismic reflection method in the Thrace Paleogene-Neogene Basin. In this context, seismic data collected on the six profiles were interpreted by correlating with the data of 97 wells. In the seismic lines, respectively, the metamorphic basement-Eocene boundary, the top of the coal-bearing zone and the boundary of the Danişmen-Ergene formations were confirmed by using the borehole data. By evaluating seismic data, the coal propagation is modeled with three dimensional (3D) figures. Moreover, coal accumulation starts from the southwest of the field and continues towards the northeast, and it is supported by the results obtained from the borehole data. The presence of uranium ore in some of the alteration zones and borehole data indicated that all alteration zones determined should be inspected for uranium ore. In addition to normal and reverse faults, positive and negative flower structures formed in the strike-slip fault zones were determined, and lignite deposits were cut in the flank of these structures. Finally, it is recommended to carry out seismic studies before drilling, to investigate potential coal and uranium areas and to plan more seismic lines.