Zeolite, Pumice, mineralogy, Chemical composition, Bulk density, Thermal conductivity.
Abstract:
Volcanic originated pumice and zeolite aggregates have low density owing to their considerable porous structure. Porosity is usually correlated with insulation properties. In order to examine the effects of this lightweight aggregates on dead load of structure and insulation properties of standard construction materials, samples were produced by using pumice and zeolite at varying percentages by volume and control samples were manufactured with crushed sand. The samples were exposed to normal (standard) curing, hot water curing and steam curing to observe the effect of different curing regimes on their behavior. Bulk density and thermal conductivity tests were carried out on samples. Both bulk density and thermal conductivity values of the lightweight mortar samples were smaller than those of control sample. Besides, chemical compositions of aggregates and cement, analyses were also performed. Silica content of pumice and zeolite were %54,09 and %75,14 by mass respectively.
Importance of grain size distribution in quantitative analysis using Rietveld Method: An experimental study
Authors:
Arif TALAY, Cumhur Ozcan KILIÇ
ABSTRACT
The Rietveld method refines a theoretical line profile until it fits the measured profile using a least squares methodology. In Rietveld method, complete qualitative mineral determination, mineral chemistry, appropriate XRD analytical conditions and sample preparation steps should be applied correctly. This study aims to determine the grain size-dependent variations in the quantitative compositions of minerals with various chemical compositions and crystallographic characteristics. Eight pure minerals (quartz, calcite, halite, colemanite, barite, polyhalite, gypsum, thenardite) are been selected, powdered, pulverized and separated into 3 different grain sizes as 228μm (Dv90), 29μm (Dv90) and 8μm (Dv90). These minerals are mixed in certain proportions to prepare three mixture samples. Mixture samples are evaluated using the Rietveld Method on XRD whole rock patterns and then compared to the actual reference mixture sample whose mixing ratio is known for each grain size. Sample with a grain size of 8μm (Dv90) with random orientation gave the closest result compared to the reference content. If the structural and physical refinement stages are processed properly, accuracy of percentage mineralogical composition increases when the grain size decreases.
Şile Neogene Basin (ŞNB) is one of the world’s crucial sedimentary clay-sand-coal basins, where approximately 3 million tons of clay and 20 million tons of sand are produced annually. The ŞNB, with a thickness of
Coal quality, mineralogy, petrography, and geochemistry of the high-strontium Bozburun lignite (Malatya, eastern Türkiye)
Authors:
Rıza Görkem OSKAY, Ali İhsan KARAYİĞİT
ABSTRACT
The Bozburun coalfield hosts a late Miocene 1.1 m thick coal seam. This study aims to determine coal quality, mineralogy, petrography and geochemistry, and controlling factors of elemental enrichments. The coals are generally black and greyish black in colour, and the low part of the seam commonly includes fossil shell remains. The ash yield displays a decreasing trend towards the upper part of the seam; in turn, gross calorific and total C values increase upwards. The total S content being generally higher than 5% (on dry basis), displays an increasing trend towards the upper part. In the entire seam, huminite is the most common maceral group, while inertinite and liptinite display variable proportions. The identified minerals by XRD are mainly quartz, clay minerals, calcite, pyrite, and aragonite (in fossil shell remains-bearing samples), whereas feldspars and marcasite determined in a few samples. Furthermore, in the coal samples, celestine and barite were identified
by SEM-EDX. This study indicates that precipitation of celestine and Sr-bearing barite grains during diagenetic stage and Sr-uptake by mollusc within the palaeomire caused Sr enrichment in the entire seam. Overall, the water influx and redox conditions controlled the mineralogical and the elemental compositions of the coal seam.
Investigation on geoarchaeological structure of ancient ports in the Lycia Region
Authors:
Su Güneş KABAKLI, M. Erkan KARAMAN
ABSTRACT
The effects of geological events that occurred in ancient times, on ancient cities are undeniably great, so geoarchaeology has become an important mutidisciplinary science. Using geological methods in archaeological researchs offers a much more comprehensive understanding for history. Today, the methods of remote sensing and geographical information systems have facilitated archaeological researches to a greater extent than before. In this study, Phaselis, Andriake and Patara ancient cities were investigated. In the research, help was obtained from satellite images as a method. By comparing the ancient coast line and the modern coast line, it is tried to be understood to what extent the sea level change occurred.
https://doi.org/10.19111/bulletinofmre.545547
Muhittin GÖRMÜŞ, Yusuf Kağan KADIOĞLU, Baki Erdoğan VAROL, Muhammed Sami US
Indexed In · Volume 161 / 2020
Early Miocene seed like plant remain fossils and facies associations from the Nallıhan district (NW Turkey)
Authors:
Muhittin GÖRMÜŞ, Yusuf Kağan KADIOĞLU, Baki Erdoğan VAROL, Muhammed Sami US
ABSTRACT
Seed like fossils recognized by their distinctive orbicular in shape are seen in the early Miocene of the Nallıhan area (NW Türkiye). We examined more than one hundred specimens and facies associations for interpreting of fossil morphology and its paleoenvironment. The fossils as dark crystallized dots on the bedding surface of clayey limestones are characterized by a thick edged lenticular shape with a smooth one side and concave another side with circular nucleus. Their internal structures have circular a few whorlings, too often radial calcitic lamellae on the upper side and a few circular coiling at the bottom side. SEM, EPMA and RAMAN data of soft nucleus, hard part, filling materials and surrounding sediments support its plant origin. The Paleogene aged Kızılbayır formation and early Miocene aged Karadoruk and Akpınar formations include the following facieses: non-channelized red sandstone and mudstone (F1), channelized “confined” reddish-beige pebbly sandstone and conglomerate (F2), medium to coarse siliciclastics (F3), mudstones interbedded with sandstones (F4), thin bedded clayey limestone bearing plant fossils (F5) medium to thick bedded limestone (F6) and rhythmic siliciclastics - clayey limestone including coal occurrences (F7). Abundant plant fossils indicate a planted shallow lake margin with low topography during the early Miocene.
https://doi.org/10.19111/bulletinofmre.609697
Usability of PC-ash as lightweight aggregate in foam concrete
Authors:
Metin DAVRAZ, Şemsettin KILINÇARSLAN
ABSTRACT
Foam concretes can be produced with aggregate or without aggregate. In this study, the possibility of using PC ash as lightweight aggregate in the production of foam concrete was investigated. Waste- PC ash is emerging from the pulverized coal furnace about 10 tons/day in a textile factory located in the vicinity of Dinar (Afyonkarahisar). The chemical properties, particle size distribution and grain densities of PC-ash were determined. Foam concrete with a dry density of 450 kg/m3 at a cement dosage of 250 kg/m3 and w/c:0.65 was produced after the aggregate analysis. The PC-ash which is used in foam concrete mix is between 0 and 200 kg/m3. 100 mm cube and 300x300x50 mm prism samples were prepared with this foam concrete. The compressive strengths of the cube samples and the thermal conductivity coefficient of the prism samples were tested at the 28th day. The average compressive strength of foam concrete samples with a density of 452 kg/m3 was determined as 1.07 MPa and the thermal conductivity coefficient was determined as 0.097 W/mK. As a result, it has been determined that PC-ash as lightweight aggregate can be successfully used in production of precast element and light floor-screed.
https://doi.org/10.19111/bulletinofmre.545562
Keywords:
Foam concrete, Lightweight aggregate, PC ash, Compressive strength, Thermal conductivity.