Utilization of pumice of Burdur region and zeolite of Bigadiç-Balıkesir region as fine aggregate in construction materials
Authors:
Özge BEYCAN TATANOĞLU, Niyazi Uğur KOÇKAL
ABSTRACT
Volcanic originated pumice and zeolite aggregates have low density owing to their considerable porous structure. Porosity is usually correlated with insulation properties. In order to examine the effects of this lightweight aggregates on dead load of structure and insulation properties of standard construction materials, samples were produced by using pumice and zeolite at varying percentages by volume and control samples were manufactured with crushed sand. The samples were exposed to normal (standard) curing, hot water curing and steam curing to observe the effect of different curing regimes on their behavior. Bulk density and thermal conductivity tests were carried out on samples. Both bulk density and thermal conductivity values of the lightweight mortar samples were smaller than those of control sample. Besides, chemical compositions of aggregates and cement, analyses were also performed. Silica content of pumice and zeolite were %54,09 and %75,14 by mass respectively.
https://doi.org/10.19111/bulletinofmre.593558
Keywords:
Zeolite, Pumice, mineralogy, Chemical composition, Bulk density, Thermal conductivity.
Fatma DAGCI, Nazli Ipek KUL GUL, Niyazi Ugur KOCKAL
Indexed In · Volume 160 / 2019
Appearance features of clayey mixtures having fly ashes
Authors:
Fatma DAGCI, Nazli Ipek KUL GUL, Niyazi Ugur KOCKAL
ABSTRACT
The use of wastes has become very significant and widespread in terms of sustainable production of clayey mixtures, since the wastes provide many advantages. In this study, the effects of two different types of fly ash, which were wastes of Seyitomer and Cayirhan thermal power plants, on the color change of brick samples with various amount of fly ash ranging between 0 to 60% at different sintering temperatures were investigated. As a result, traditional red colored bricks could be produced with fly ash without using a separate raw material to meet the color requirements. It was found that desired colors for special architectural applications could also be achieved by using fly ash.
https://doi.org/10.19111/bulletinofmre.502845