Kamil KAYABALI, Ramin ASADİ, Mustafa FENER, Orhan DİKMEN, Farhad HABİBZADEH, Özgür AKTÜRK
Indexed In · Volume 162 / 2020
Estimation of the compaction characteristics of soils using the static compaction method
Authors:
Kamil KAYABALI, Ramin ASADİ, Mustafa FENER, Orhan DİKMEN, Farhad HABİBZADEH, Özgür AKTÜRK
ABSTRACT
Ground improvement using mechanical stabilization is commonly applied by performing the standard Proctor compaction test, which requires a significant quantity of soil, usually obtained from open pits. A static compaction test is an alternative laboratory compaction test. Although researchers have shown that the results of miniature size static compaction tests are comparable with that of standard Proctor tests in terms of the maximum dry density and the optimum water content, no attempt has been made to compare the two fundamental properties of the compacted soil: undrained shear strength and hydraulic conductivity. The scope of this investigation was to estimate the level of static compaction energy required to (1) obtain a compaction curve similar to that of the standard Proctor test; (2) reconstruct compacted soils using the standard Proctor and static compaction tests at the optimum water content; and (3) compare the undrained shear strength and hydraulic conductivity of compacted soils. The compacted soils at the predetermined energy level were subjected to hydraulic conductivity tests using the rigid-wall falling-head permeability method. Undrained shear strength tests were performed by employing a high-capacity laboratory vane shear apparatus on compacted samples of both the standard Proctor and static compaction tests. The present investigation revealed that the static compaction test, requiring about only 10% of the soil necessary to perform the standard Proctor method, provides comparable results in regard to hydraulic conductivity and undrained shear strength.
https://doi.org/10.19111/bulletinofmre.603873
Keywords:
Static compaction, Standard Proctor, Unconfined compressive strength, Permeability, Compaction energy.
Kamil KAYABALI, Pınar YILMAZ, Mustafa FENER, Ozgür AKTÜRK, Farhad HABİBZADEH
Indexed In · Volume 156 / 2018
Assessment of souil liquefaction using the energy approach
Authors:
Kamil KAYABALI, Pınar YILMAZ, Mustafa FENER, Ozgür AKTÜRK, Farhad HABİBZADEH
ABSTRACT
Damage to structures during earthquakes may be fully or partly caused by soil liquefaction, which has been the subject of extensive research for several decades. Liquefaction susceptibility of a sandy deposit is performed by comparing the resistance of a soil to liquefaction (i.e., capacity) to the load imparted by an earthquake (i.e., demand). In this regard, the stress-based method of liquefaction assessment is by far the most popular. It involves uncertainties mostly related to the computation of the maximum horizontal ground acceleration (amax) at bedrock. A site response analysis or a simplifi ed assumption is necessary to determine the amax on the ground level as well. Developing from the stress-based approach, the strain-based approach has also similar constraints. There exist laboratory techniques such as torsional shear to determine the capacity of a sandy soil in terms of liquefaction energy per unit volume. Likewise, the energy of a strong motion record can be set by employing simple physics principles. For this, a velocity time history and the unit mass of the soil are employed to compute the demand of any strong motion record. The scope of this investigation is to illustrate the usability of the energy-based method for the evaluation of soil liquefaction. The defi ciencies of the stress- and strain-based approaches are outlined and the advantages of the energybased approach are discussed.
http://dx.doi.org/10.19111/bulletinofmre.351257
Keywords:
Liquefaction, stress method, strain method, energy method, earthquake energy,