Ayşe ERDEM, Hüseyin Eren OBUZ, Haydar GÜNEŞ, Şölen DİKTEPE, Buse ÖZEN İLİK, Çiğdem KARA, Hasan AKÇAY, Akan GÜLMEZ, Zümrüt ALKAN
Indexed In · Volume 168 / 2022
Extraction of rubidium from Malatya - Kuluncak area complex ore
Authors:
Ayşe ERDEM, Hüseyin Eren OBUZ, Haydar GÜNEŞ, Şölen DİKTEPE, Buse ÖZEN İLİK, Çiğdem KARA, Hasan AKÇAY, Akan GÜLMEZ, Zümrüt ALKAN
ABSTRACT
In this study, studies were carried out to take rubidium (Rb), which is in a complex form of Na +K feldspar, pyroxene, and alumina silicate into solution in an environmentally sensitive manner with high recovery. Malatya - Kuluncak complex ore was used in this study. In the first stage of the study, the roasting method was tried to obtain rubidium chloride (RbCl) or rubidium sulphate (Rb2SO4) structures, which are the water-soluble forms of rubidium in the sodium-potassium feldspar structure. Roasting was carried out using different additives and calcium chloride was identified as the most suitable additive material for this ore structure. In studies investigating the effect of roasting temperature and time, the evaporation amount of RbCl was calculated. After deciding on the additives, the additive amount, solid/liquid ratio in the leaching stage, and leach time were optimized. The optimum conditions were determined as a leaching time of 120 minutes at 1/3 solid/ liquid ratio after roasting for 60 minutes at the roasting temperature of 900 °C at 70% calcium chloride (CaCl2) addition. the solution efficiency of rubidium was calculated as 96%. Taking Rb into solution from primary sources was first achieved with this study in Türkiye.
Ayşe ERDEM, Haydar GÜNEŞ, Çiğdem KARA, Hasan AKÇAY, Akan GÜLMEZ, Zümrüt ALKAN
Indexed In · Volume 164 / 2021
Production of high purity thorium oxide from complex ores leach liquor
Authors:
Ayşe ERDEM, Haydar GÜNEŞ, Çiğdem KARA, Hasan AKÇAY, Akan GÜLMEZ, Zümrüt ALKAN
ABSTRACT
This paper investigates a method for separation and purification of thorium from leach liquors containing rare-earth elements (REE). Iron, which causes problems in the stage of thorium extracting, was first removed by using Adogen 464 solvent. Thorium was extracted with 30% D2EHPA-in kerosene with 1/3 organic/aqueous ratio and stoichiometry of the thorium-D2EHPA complex was calculated as 1:2.6 from slope analysis. After the extraction, LREE and HREE were scrubbed from the extracted organic with 0.25 M H₂SO₄ and 6 M HCl, respectively. Thorium oxalate was precipitated by oxalic acid and calcined at 1,050 °C. It was, after calcination, determined that purity of thorium oxide is 99.23%, based on the ICP-OES analysis..
https://doi.org/10.19111/bulletinofmre.709316