Volume 153 · 2016 · 11 ARTICLES
All Articles In This Issue
01
Indexed In · Volume 153 / 2016
UPPER CRETACEOUS-TERTIARY GEOLOGY/STRATIGRAPHY OF PERTEK AND ITS VICINITY (TUNCELİ, TURKEY)
Authors: ABSTRACTThe basement units of the studied region are Paleozoic-Mesozoic Keban metamorphic and Upper Cretaceous Elazığ magmatics. As a result of tectonic events caused by final collision in Middle Maastrichtian, all these basement units were juxtaposed, uplifted, eroded and acted as source areas for the Upper Cretaceous-Paleogene basins. Upper Cretaceous-Paleogene units were sampled systematically in order to determine their ages and lithologies. These marine units were identified as Harami, Seske and Kırkgeçit formations based on new age data and their stratigraphic positions. Other units of the study area are Upper Oligocene-Lower Miocene Alibonca formation and Pliyosen Karabakır formation. Harami formation, late Maastrictian-Thanetian in age, comprises grainstone with sandstone intercalation at the base and white colored marble-like limestone at the upper part. Seske formation late Cuisian - early middle Lutetian aged consists of pebblestone, including pebbles from Elazığ magmatics and Harami formation. The upper part of the unit comprises carbonate cemented sandstone with plenty of nummulites and ophiolitic fragments. Kırkgeçit formation, early Bartonian-early Chattian in age, comprises sandstone-siltstone-limestone intercalation. Alibonca formation, Late Oligocene-Early Miocene in age, consists of pebblestone at the lowest part, reefal limestone in the middle and clayey limestone with limestone interlayers in the upper part of the sequence. Karabakır formation is consists of pebblestone-mudstone and locally pyroclastic rocks and lava intercalations. Volcanites comprise basalt with sedimentary interbeds and pyroclastics. It has lateral and vertical transitions with the sedimantary lithologies of Karabakır formation. There are no data to date the formation; however, based on its stratigraphical position and its lateral equivalents, it is assumed to be Pliocene. In the studied area, macrotectonic events were experienced during the Maastrictian, Early Eocene, Middle Eocene (middle-upper Lutetian), Middle Oligocene, Middle?-Upper Miocene and Latest Pliocene. During the last deformation phase, the Anatolian plate began moving westward which is bounded in the E.SE by the East Anatolin Fault. In the study area Pertek fault started to move as a rigth-lateral strike-slip fault.
Keywords:
02
Indexed In · Volume 153 / 2016
TECTONIC DEFORMATIONS IN THE QUATERNARY DEPOSITS OF THE LAKE VAN (EDREMİT BAY), EASTERN ANATOLIA, TURKEY
Authors: ABSTRACTThe 23 October 2011 Van Earthquake (Mw: 7.2) was generated by the Van Fault Zone (VFZ) with reverse fault characteristics. The earthquake on the fault caused surface deformation with 10 cm displacement observed in engineering structures. On land the VFZ has general E-W strike and 28 km length. The western end of the fault is within Lake Van. This study aimed to determine the tectonic structures and evolution in the Quaternary of Edremit Bay using detailed mapping of the VFZ with land and underwater research methods, investigation of its continuation into Lake Van and common assessment of land and underwater data. Continental data showed the presence of E-W fold axes affecting Quaternary units in the hanging-wall and footwall of the VFZ. Offshore studies using shallow seismic profiling (GeoAcoustics) and multibeam bathymetric data acquisition determined that the underwater section of the VFZ had similar characteristics to those on land. Quaternary successions on the lake floor observed on seismic sections clearly showed folds in both blocks of the fault with axes parallel to the strike of the fault. The underwater ridge that is an extension of Çarpanak Cape coincides with the ridge structure on the hanging-wall block of the fault on land. Surface deformation related to the 23 October 2011 earthquake developed in a broad zone of the hanging wall of the VFZ. The research findings show the deformation along the VFZ in the Quaternary is in accordance with the deformations developing during the last earthquake.
Keywords:
03
Indexed In · Volume 153 / 2016
DIAGENETIC HISTORY OF THE ROCK UNITS OF BOZKIR UNIT CONTROLLED BY THE TRIASSIC RIFTING, BOZKIR-KONYA
Authors: ABSTRACTThe Bozkır Unit representing the northern edge of the Taurus Belt. It comprises from bottom to top, three distinct structural entities: the Upper Triassic pre-rift (Korualan Group), the Upper Triassic-Upper Cretaceous syn-rift (Huğlu Group) and the Jurassic-Cretaceous Boyalı Tepe Group as to their structural settings. The Korualan Group is represented by the alternations of carbonate (limestone, dolomitic limestone, dolomite) with radiolarite and chert intercalations and clastic rocks (sandstone, siltstone, mudstone, shale). The Huğlu Group is made up of volcanic (basalt, andesite) and pyroclastic (tuffaceous sandstone) rocks including radyolarite, limestone and clastic rock (sandstone, siltstone, shale) intercalations. The Boyalı Tepe Group is completely made of carbonate rocks. The carbonate-silisiclastic-volcanogenic rocks of the Bozkır Unit contain carbonate (calcite, dolomite), quartz, feldspar (plagioclase, anortoclase), phyllosilicate (illite, chlorite, mixed-layered illite-chlorite / I-C, chlorite-vermiculite / C-V, chlorite-smectite / C-S, rarely smectite), augite, hematite, analcime and heulandite in order of abundance. On the basis of illite Kübler Index data; Korualan Group and Huğlu Group reflect low grade diagenetic, high grade diagenetic and high grade diagenetic-anchizonal characteristics, respectively. The illite/micas of the pre-rift units and units related to the rifting have muscovitic, and phengitic and seladonitic compositions, respectively. The distributions of chondrite-normalized trace and rare earth element (REE) contents in the illites present similar trends for Korulan ve Huğlu groups, but the quantities of these elements slightly increase in the Huğlu Group. d18O–dD isotopic compositions of water forming the illite minerals are different than that of sea water and found to be between Eastern Mediterranean Meteoric Water (EMMW) and magmatic water compositions. It also shows that temperature of the water forming the illite minerals varies from low to high values. The findings from the rocks of Bozkır Unit suggest that pre- and syn-rift units have different mineralogical-petrographical and geochemical properties. The younger units within the rift due to extension and crustal thinning related to rifting must have exposed in higher diagenetic conditions by more burial and heat with respect to older units at the edges.
Keywords:
04
Indexed In · Volume 153 / 2016
TRACE FOSSILS FROM DEEP SEA SEDIMENTS OF THE LATE EOCENE CEYLAN FORMATION, GELİBOLU PENINSULA (SW THRACE, TURKEY)
Authors: ABSTRACTIn this study, trace fossils of the Ceylan Formation (Late Eocene) in the area NW of Fındıklı village and on the coast of the Ece Bay the Gelibolu Peninsula are identified for the first time. They occur in gray siltstones and mudstones intercalated with thin-bedded, parallel and ripple laminated sandstones, which were deposited on a basin plain in proximilt of a slopes in the Thrace Basin. The Late Eocene Ceylan Formation includes pre-depositionl (Belorhaphe zickzack, Desmograpton isp., Helicolithus ramosus, Helminthorhaphe flexuosa, Paleodictyon majus, Paleodictyon minimum, Paleodictyon strozzii, Saerichnites isp., Urohelminthoida appendiculata) and post-depositional (Phycosiphon incertum, Spongeliomorpha oraviense, Trichichnus isp., Planolites isp., Ophiomorpha isp., Ophiomorpha annulata, Scolicia isp., Scolicia prisca, and Thalassinoides isp.) trace fossils. This trace fossil assemblage is typical of the Nereites ichnofacies (Paleodictyon ichnosubfacies), which characterize deep-sea, thin bedded turbididitic sediments oxygenated sea floor.
Keywords:
05
Indexed In · Volume 153 / 2016
OSTRACOD FAUNA AND ITS ENVIRONMENTAL CHARACTERISTICS OF KÖPRÜKÖY / ERZURUM (EAST ANATOLIA) REGION
Authors: ABSTRACTStudy was carried out within Horasan formation around Köprüköy located in the east of Erzurum This formation is available in the region of Erzurum-Pasinler-Horasan forming the northest where neo-tectonic sediments are surfaced in East Anatolia. The unit is composed of pebble stones, clays and marl iteration. Ostracod, gastropod and pelecypod species were observed on the levels of clay stone with soft clasts and marl taken from the area. Generally, ostracod species which are unique to Ponto- Caspian basin were described in these units within the scope of the study. These are such ostracod species as Amnicythere idonea Mandelstam, Markova, Rozyeva and Stepanajtys, Candona (Caspiocypris) erzurumensis Freels, Candona (Caspiocypris) araxica Freels, Candona (Caspiocypris) aff. alta (Zalanyi), Candona (Lineocypris) aff. granulosa Zalanyi, Bakunella cf. dorsoarcuata (Zalanyi), Bakunella cf. subtriangularis (Sveyer),Candona (Candona) lycica Freels, Candona (Candona) armenia Freels, Candona (Candona) aff. elongata (Svejer), Fossilyocypris sarızensis (Şafak, Nazik and Şenol). There are also such micro mollusc species as Gyraulus inornatus, Dreissena polymorpha available in the sequence. Among these -genera; Candona (Candona) fresh water, Candona (Caspiocypris), Candona (Lineocypris), Fossilyocypris fresh - brackish water (oligohaline), Bakunella characterizes rarely fresh water,mostly brackish water, Amnicythere characterizes brackish water, Gyraulus, Dreissena characterize fresh water conditions. Ostracod fauna, determined in this study, indicates a group clearly supporting these comments in terms of the relation of age and environment and the age of the formation is Late Miocene- Pliocene according to the fauna.
Keywords:
06
Indexed In · Volume 153 / 2016
MINERALOGY AND GEOCHEMISTRY OF THE KOCADAL (TORUL, GÜMÜŞHANE, EASTERN BLACK SEA REGION, TURKEY) ZN-PB-AG, AU AND CU MINERALIZATIONS
Authors: ABSTRACTThe Kocadal base and precious metal mineralizations are located in the southwest of Gümüşhane province of the eastern Pontide orogenic belt. In the vicinity of the Kocadal mineralization, Gümüşhane granite, lithologies of the Hamurkesen, Berdiga, and Mescitli formations, dacite porphyry and andesite porphyry are present with abundant alluvium. Based on geological, mineralogical, and geochemical features, three mineralization styles have been recognized at the Kocadal area: (i) Mineralizations around Batarya tepe include (ia) Zn mineralization within the conglomerates and sandstones of the Hamurkesen formation and (ib) Zn-Pb-Ag-(Au) mineralization associated with dacite prophyry, (ii) Au mineralization, which occurs to the southwestern of Batarya tepe, and (iii) Cu mineralizations related to quartz veins and veinlets at Gözelerin Dere. Mineralized gravels within the conglomerates contains mainly sphalerite and pyrite, whereas hydrothermal mineralizations associated with porphyritic dacite comprise pyrite and sphalerite, with minor galena, chalcopyrite, pyrrhotite, arsenopyrite, marcasite, fahlerz, pyrargyrite, and proustite. Alteration patterns of hydrothermal mineralization in the field, from older to younger, are classified as: (i) tremolite-actinolite±garnet, (ii) quartz-sericite-chlorite, and (iii) carbonate-quartz. Mineralized gravels within the conglomerates contains mainly sphalerite and pyrite, whereas pyrite, chalcopyrite, and galena are common in quartz veins at Gözelerin Dere. Geostatistical studies based on the results of geochemical analysis of core samples reveal the presence of the distinct element associations for the different styles of mineralizations.
Keywords:
07
Indexed In · Volume 153 / 2016
SPATIAL CLUSTER AND OUTLIER IDENTIFICATION OF GEOCHEMICAL ASSOCIATION OF ELEMENTS: A CASE STUDY IN JUIRUI COPPER MINING AREA
Authors: ABSTRACTSpatial clusters and spatial outliers play an important role in the study of the spatial distribution patterns of geochemical data. They characterize the fundamental properties of mineralization processes, the spatial distribution of mineral deposits, and ore element concentrations in mineral districts. In this study, a new method for the study of spatial distribution patterns of multivariate data is proposed based on a combination of robust Mahalanobis distance and local Moran’s Ii. In order to construct the spatial matrix, the Moran’s I spatial correlogram was first used to determine the range. The robust Mahalanobis distances were then computed for an association of elements. Finally, local Moran’s Ii statistics was used to measure the degree of spatial association and discover the spatial distribution patterns of associations of Cu, Au, Mo, Ag, Pb, Zn, As, and Sb elements including spatial clusters and spatial outliers. Spatial patterns were analyzed at six different spatial scales (2km, 4 km, 6 km, 8 km, 10 km and 12 km) for both the raw data and Box-Cox transformed data. The results show that identified spatial cluster and spatial outlier areas using local Moran’s Ii and the robust Mahalanobis accord the objective reality and have a good conformity with known deposits in the study area.
Keywords:
08
Indexed In · Volume 153 / 2016
INVESTIGATION OF THE WATER RESOURCES IN KÖPRÜÖREN BASIN (KÜTAHYA) WITH ENVIRONMENTAL ISOTOPES
Authors: ABSTRACTIn this study, the isotopic properties of the water resources located in Köprüören Basin are determined. δ18O and δD contents of the samples respectively ranged from -10.84‰ to -7.09‰ and from -73.6‰ to -53.3‰ in dry season and ranged from -10.81‰ to -4.71‰ and -73.3‰ to -41.5‰ in wet season. Majority of the samples plotted along Global Meteoric Water Line although some of them show deviations from this line. The reason for the deviations are attributed to evaporative enrichment, modifying the original δ18O and δD signatures of the samples. δ18O content of the thermal samples are not modified as a result of water-rock interaction due to low wellhead and reservoir temperatures. Tritium concentrations for all samples range from ~0 to 6 TU in wet season and from ~0 to 8 TU in dry season. Accordingly, some of the groundwater samples are recharged from modern precipitation, their groundwater residence times are short and they have shallow circulation. Besides, samples with tritium concentrations close to detection limits (thermal water samples and two of the groundwater samples) were recharged before tritium from nuclear weapon tests and have relatively higher residence times. These samples were also analysed for δ13C and 14C to get information about the residence times. δ13C and percent modern carbon contents of five samples range from -5‰ to -14.6‰ and from 8.2 to 78 pmc, respectively. The corrected 14C ages for these samples are up to 11500 years before present, thereby indicating the presence of paleowaters in the basin. δ13C data indicate that 14C contents of the thermal waters were diluted as a result of water-rock interaction.
Keywords:
09
Indexed In · Volume 153 / 2016
INVESTIGATION OF THE SEISMIC VELOCITY DISTRIBUTION AND CRUSTAL STRUCTURE OF TURKEY BY MEANS OF GRAVITY DATA
Authors: ABSTRACTIn this study, the apparent gravity density data was measured for Turkey using apparent density filter, and the seismic velocity distribution map was generated from this data cluster. By interpreting these two measured data clusters, three dimensional structure of the Conrad discontinuity was investigated. The apparent gravity filter is a kind of filter which is used in the apparent gravity measurements for different depth levels different than gravity data. In this study, considering previously measured distribution of the continental crustal thickness of the Anatolia, the density maps for different depth levels were formed and interpreted. The lowest and highest densities in different levels of Turkey are 2.23 gr/cm3 , and 3 gr/cm3 , respectively; and the mean density is 2.698 gr/cm3 . The lowest and highest seismic velocities for different thicknesses were measured as 3.20 km/sec and 6.83 km/sec, respectively. However; the mean seismic velocity of Turkey for depths increasing up to 10 km until MOHO discontinuity was estimated as 5.66 km/sec The density and seismic velocity in the first 20 km of the continental crust have reached its highest values as 2.74 gr/cm3 and 5.86 km/sec, respectively. This zone is also the Conrad discontinuity between the lower and upper crusts, and its average depth is 16 km in Turkey. The Conrad discontinuity boundary, which developed between SIAL-SIMA, not to be observed in the East Anatolian High Plateau made us consider that SIMA had disappeared as a result of the geological evolution, and the available crust could only be SIAL in origin.
Keywords:
10
Indexed In · Volume 153 / 2016
GEOPHYSICAL REGIONAL GRAVITY MAPS OF TURKEY AND ITS GENERAL ASSESSMENT
Authors: ABSTRACTIn this study, the maps generated from the regional gravity data, which had been measured within scope of “Türkiye Rejyonal Gravite Haritaları Projesi” (Regional Gravity Map of Turkey) project were introduced. The topography, Free Air, Bouguer gravity, isostatic residual, isostatic regional, density and crust thickness maps of Turkey in 1/1 500 000 scale were prepared using database which started in 1973 and ended in 2011. The boundaries of the main tectonic members were determined by crust thickness, isostatic residual and Bouguer gravity maps of Turkey. Within this scope, a database that will illuminate the investigation of crustal structure, the development of the scientific database and the solution of geological problems were established.
Keywords:
11
Indexed In · Volume 153 / 2016
PROPOSALS FOR THE STANDARD PRESENTATION OF ELEMENTS OF NATURAL AND CULTURAL HERITAGE WITHIN THE SCOPE OF GEOPARK PROJECTS
Authors: ABSTRACTThe aim of this work is to develop suggestions for designated standards for the display of natural and cultural assets in the design of a Geopark. During a continuing dynamic period detailed work continues to be carried out by experts on the natural and cultural assets found within Geosites that are part of Geoparks according to National laws and guidelines and international agreements. This article proposes standard identity cards, to be used during the period of preparation of a Geopark Project within an area that encompasses a known number of natural and cultural assets. This enables a shared organisation and language to be used within the organisation process relating to the consolidation of data, set-up of visitor centres and route planning activity organisation. The identity cards in question should be prepared in such a way that they give short, interesting summary information about the characteristics of these natural and cultural assets that fits well with, and can be used in conjunction with, other information, brochures and map materials. There is also the potential to prepare graduated identity cards according to the interests of different age groups and levels of understanding. The cards, easy to carry and containing safety information, will therefore be useable by every visitor of whatever age or level of interest (professional, amateur), and will also therefore be useable as educational materials. This work will also open up debate about the new classification and assessment system it proposes in the light of legal definitions and terms and other measures practiced across the world. To develop a classification system is the product of long and hard work and the discussions necessary for the progress of the system may last for years. Indeed some classification systems in use for years come to the point of being inadequate in the light of scientific developments and need to be re-designed. This is the path of scientific thought. There is no doubt that conceptual discussion of these developments that are new both in Turkey and in the wider world will continue in the future. Although consciousness of safeguarding as well as legal policies for cultural assets have progressed to a certain point, unfortunately the same is not true for natural assets. This article presents a contribution to all works in this field both through proposals for standard identity cards for natural and cultural assets and for a classification system for geosites.
Keywords:
No articles match your search.