Latest Pliocene-Quaternary uplift of the central Tauride and Evolutionary history of the Kızıllar Canyon, southern central Anatolia-Türkiye
Authors:
Ali KOÇYİĞİT, Uğur DOĞAN
ABSTRACT
The study area is located near the apex of the north-facing and V-shaped Konya-Niğde Graben. Its south-southeast margin is defined and controlled by the NE-trending Karaman-Niğde Fault Zone. It also forms the geographic boundary between the central Tauride in the south and central Anatolia in the north. This study aimed to determine the Latest Pliocene-Quaternary uplift rate of the central Tauride and the evolutionary history of the Kızıllar Canyon located on the uplifting southern footwall block of the Karaman Niğde Fault Zone. Both the geological and geomorphological field data, which were obtained within the framework of this study, revealed the following: (1) the Kızıllar River drainage system developed as a result of several capture events; (2) Lithological and hydrological characteristics of the valley reveal the reason for the lack of gradation in the river’s longitudinal profile; (3) the Kızıllar Canyon reflects the incision process of the Kızıllar River; (4) the Kızıllar River cut vertically into its bed up to 230 m, which corresponds to the minimum Latest Pliocene- Quaternary uplift rate of the central Tauride (~0.06 mm/yr); and (5) the Kızıllar Canyon developed as a natural response of the river to the uplift of the Konya-Niğde Fault Zone footwall block.
Keywords:
Kızıllar Canyon, Central Taurides, Central Anatolia, Fault, Uplift Rate
The Dodurga Fault is an active right-lateral strike-slip fault, approximately 63 km long, striking NW-SE in northwestern Anatolia. Based on 1:25,000-scale active fault mapping, the fault is subdivided into two principal geometric segments. Segment 1 is approximately 16 km long and extends from Sulhiye in the west to Erikli in the east, whereas Segment 2 is 47 km long and is characterized by a right-stepping geometry and a 10°-15° southeastern deflection. Geological and geomorphological observations, together with kinematic analyses, indicate that the fault is dominantly right-lateral strike-slip in character. Stream channels offset by up to several kilometers along the fault trace support its long-term activity, and fault-plane kinematic indicators independently confirm dextral motion. Paleostress analyses of the kinematic data indicate that the recent deformation phase along the Dodurga Fault is governed by approximately N-S contraction and E-W extension. Empirical scaling relationships suggest that Segment 1 and Segment 2 are capable of generating earthquakes of Mw 6.47 and Mw 6.97, respectively. If both segmentsrupture together, the Dodurga Fault could potentially generate an earthquake of Mw 7.16.
Modeling the discharge of Kapuzbaşı spring for parameterization of the karst aquifer, Aladağ Mountains, Central Taurus, Türkiye
Authors:
Süleyman Selim ÇALLI
ABSTRACT
Kapuzbaşı karst spring is located between Kayseri and Adana, one of the most important and wellstudied mountainous karst regions, Aladağlar, Central Taurus, Türkiye. Previous scientific studies revealed the hydrogeological setup, perceptual model including groundwater residence time and potential recharge-discharge relationship; however, there has not been any process-based conceptual
modeling experiment on the karst spring aiming to parameterize the karst system hydrodynamics. In the present study, we aimed to develop a numerical model of the karst groundwater system to parameterize the system hydrodynamics, which was built based on the conceptual understanding of the karst hydrogeology. We selected the lumped-conceptual hydrological model of KarstMod to quantify the discharge of the Kapuzbaşı spring. The modeling experiment showed that the recharge area of the karst spring is covering approximately 350 km2, and the approximate annual discharge exceeds 250 hm3. The preferential flow mechanism triggered after the water level in epikarst exceeding 92 mm, and the melt factor is approximated as 9.91 mm/°C/day. The response time of conduit reservoir is approximately 1 day, and the loss flux triggered when the water level in conduit reservoir exceeding 4 mm. The hydraulic conductivity of the matrix reservoir is found approx. 0.012 mm/day. The model performance based on the daily discharge was obtained as Nash Sutcliffe Efficiency (NSE) = 0.77, and Kling-Gupta Efficiency (KGE) = 0.87 in the calibration, and NSE = 0.76, and KGE = 0.77 for the validation periods, respectively. Eliminating the less sensitive model parameters in the calibration leads to more robust and less uncertain discharge simulations.
Keywords:
Kapuzbaşı Karst Spring, Aladağ Mountains, Hydrological Model, KarstMod, Central Taurus
SOME OF THE STRUCTURAL AND GENETIC CHARACTERISTICS AND THE ZONAL DISTRIBUTION OF NONFERROUS METALS DEPOSITS IN EASTERN PONTIDES
Authors:
Radule POPOVIC
ABSTRACT
he writer has been engaged in certain studies on the structural and economic geology in the eastern Pontides. These studies, including the field work of the author (observations, research, mapping) gave numerous new data on the structural, geochemical, geological, genetic and paragenetic features of the suphide deposits (Cu, Pb, Zn) located in this region. This paper is related to the part of the Black Sea region, situated between the town of Rize and the Turkish-USSR border, and between the Black Sea coast in the north and the Çoruh River in the south (Enel. I). This is the typical mountainous area with highly developed relief, and dense rhododendron vegetation. The elevations range from sea level to over 3,000 m. The hydrographic network is well developed, the rivers and streams are rich in water but their flows are short. The outcrops are relatively rare, and the field work has been faced with numerous difficulties. The area is very interesting both from the economic and theoretical importance, due to the fact that numerous sulphide occurrences and a number of sulphide deposits have been discovered here. On the other hand, the investigations have demonstrated that this area belongs to a very large zone, i.l. to the copper-bearing metallogenic belt which extends throughout Iran, Caucasus, Northeastern Turkey, Bulgaria, Eastern Yugoslavia and Romania. The Black Sea region has been of continuous economic importance since ancient civilization. This conclusion is based on the numerous traces of the ancient mining. From the beginning of this Century the importance of this region is rapidly growing. The investigations were conducted by numerous geologists, starting from the amateur geologists to the most famous names in modern geology. The author's desire is to give a modest contribution to the common efforts with intention to solve some of the geologic problems related to the described area.