Sustainability of geothermal energy is related with the type of geothermal resources (natural springs, well), usage situations (thermal, residential-greenhouse heating, energy, etc.), amount of use (optimal flow, appropriate pressure-temperature changes), conservation of resources, and is mostly achieved by reinjection of the geothermal fluid returning from usage. It is important to take measures to prevent adverse changes in temperature and pressure conditions in the reservoir to properly remove the fluid returning from use in geothermal areas from the environment and recharge the reservoir. Reinjection should be carried out under appropriate conditions for the protection of resources. In the operation of geothermal resources, reinjection/discharge conditions and obligations are also specified in the provisions of the Law No. 5686 and the implementing regulation. Various studies within the scope of exploration activities in geothermal fields, determining the productionreinjection areas and determination the location of the reinjection wells in conditions that will not adversely affect the production pressure-temperature conditions are of great importance for the sustainability of the geothermal reservoir.
Update on the utilisation of geothermal energy for space and greenhouse heating in Türkiye
Authors:
Oktay ÇELMEN, Sanem ELİDEMİR, Macit KARADAĞLAR
ABSTRACT
As one of the sustainable, domestic and renewable resource, geothermal energy has a high potential and range of application in Türkiye and it is widely used especially in space and greenhouse heating. In this study, to overcome the challenges experienced in accessing data regarding geothermal energy utilisation in Türkiye (not being available in a single source, database irregularity/inadequacy, etc.) and to form a basis for future studies, current data were collected from various institutions and compiled by focusing on space and greenhouse heating. As of 2024, 170481 Residences Equivalence (1704.8 MWt) of space is heated with geothermal energy through 25 fields in 13 provinces. Additionally, 6970158 m2 (1394 MWt) of greenhouses are heated through 62 fields in 27 provinces. 94% of space and 81% of greenhouse heating are carried out in Western Anatolia and Afyonkarahisar is the province with the most space and greenhouse heating. Most areas including 20 geothermal fields and numerous facilities (hotels, schools, etc.) are also heated with domestic heating. Space and greenhouse heating have increased by 210% and 850%, respetively, between 2007 and 2024. Considering Türkiye’s geothermal potential, it is expected that this development
will be even greater, especially in Eastern Anatolia.
Keywords:
Geothermal Resource, Space Heating, Greenhouse Heating, Inventory Update, Türkiye.
Comparative analysis of water and carbon dioxide injection for the thermohydraulics of an EGS project in Dikili Geothermal Field, Türkiye
Authors:
Ali Cemal BENİM, Aydın ÇİÇEK
ABSTRACT
A comparative numerical analysis of the thermohydraulics of an enhanced geothermal system (EGS) project in Türkiye in Dikili area is presented. The fractured granodiorite is modelled as porous media, utilizing the numerically suggested data of other authors for the corresponding hydraulic characteristics. As the heat transmission fluid, two different mediums are alternatively considered. These are the more classical medium, water and the supercritical carbon dioxide (sCO2). Transient calculations are performed for a time period of twenty years, comparing the temporally developing results obtained for water and sCO2 with each other. Based on modeling parameters and assumptions, higher production temperatures are observed with sCO2, in comparison to water, implying an advantage for sCO2 usage as a working fluid in EGS. This is accompanied by the further advantage of a lower pressure drop for sCO2. On the other hand, the temperature advantage is relativized by the lower specific heat capacity of sCO2 causing a decrease in the production thermal power. In general, the present results are found to be encouraging for a further and more detailed analysis of the employment of sCO2 as working fluid in EGS.
Geothermal gradient variation in the Büyük Menderes Graben: implications for geothermal potential of the graben, Western Anatolia, Türkiye
Authors:
Adrian WIGGINS,, İbrahim ÇEMEN
ABSTRACT
The Büyük Menderes Graben (BMG) is an E-W oriented active extensional geothermal basin within the Menderes Massif, a metamorphic core complex, in Western Anatolia, Türkiye. 1500 (megawattsenergy) MWe of installed geothermal capacity for power production exist as of December 2019 in Western Anatolia, mostly generated in the BMG. While the BMG is a vastly producing geothermal resource, it is predicted that it has higher production potential. However, other studies do not include field scale 3D geologic models or geothermal gradient maps. This study aims to first quantitatively test the geothermal gradients in the Aydın-İncirliova-Osmanbükü Geothermal Field (IGF), then map the information. This study also aims to compare the IGF with a neighboring geothermal field. To complete this study, information from stratigraphic columns, bottom hole temperatures, and continuous temperature logs from 13 geothermal wells is utilized with Leapfrog Geothermal to create 3D models of the geology and subsurface temperature distribution. Then, isothermal contour maps of the field are created. The geologic modeling suggests that synextensional deposition has occurred within the graben. The temperature modeling suggests both that thermal breakthrough may have occurred in the field, and that the IGF has a higher geothermal gradient than the nearbyGermencik Geothermal Field.
Keywords:
Extensional Terrane, Tectonics, 3D Model, Temperature Gradient Map, Leapfrog.
Tuğba ISIK, Alper BABA, Dornadula CHANDRASEKHARAM, Mustafa Muammer DEMİR
Indexed In · Volume 171 / August 2023
A brief overview on geothermal scaling
Authors:
Tuğba ISIK, Alper BABA, Dornadula CHANDRASEKHARAM, Mustafa Muammer DEMİR
ABSTRACT
Hot spring waters are rich in terms of minerals. Since there are dramatic changes in thermodynamic parameters in geothermal power plants, such as a decrease in temperature and pressure, severe precipitation occurs throughout the system components in an uncontrolled manner. There are three main chemistries in deposits: carbonates (mainly calcium carbonates), silicates (metal silicates), and sulphides (antimony sulphide-stibnite). Energy harvesting is remarkably reduced out of the insulating nature of the deposit. Various actions need to be taken to mitigate this undesirable issue of scaling in geothermal systems. Geothermal systems are in fact quite complex, and the composition of brine and, accordingly, the chemistry of the deposit are not identical. Therefore, each system should be studied individually, and a tailor-made remedy should be developed. In this overview, the types of deposits in terms of chemistry and the actions (pH modification or antiscalant dosing) that
should be taken to reduce scaling are mentioned, and potential chemistries of antiscalants are given.