Tadaout-Tizi n’Rsas Anticline, Tafilalet, Eastern Anti-Atlas, Variscan Shortening, Normal Faults.
Abstract:
The abundance of the NE-SW direction veins mineralized in barite, copper, lead and zinc in the Tadaout-Tizi n’Rsas (TTR) anticline make this area one of the principal vein fields in Tafilalet (easternmost border of the Eastern Anti-Atlas). Reactivation of faults and alternation of competent (thicks Ordovician series, Silurian limestone and Devonian limestone) and incompetent levels (Silurian shales and Devonian marls) have an important role in the deformation of the TTR anticline during the NE-SW Variscan shortening. Our work based on lineaments extraction using a Landsat 8 OLI combined with some geological cross sections, shows a N130° major fold corresponding to TTR anticline. This big fold shows internal N130°, N95° and N20° minor folds. This structure indicates that the TTR area was formed in the hinge between the Anti-Atlas and the Ougarta belts. A number of these folds are the consequence of the underlying Precambrian faults reactivation and alternation of competent and incompetent levels. Brittle tectonics is dominated by NE-SW normal faults which result from the NE-SW shortening consequence of the Gondwana and Eurasia continents collision. Consequently, the mineralization of TTR is necessarily related to late or post-Variscan orogeny.
Role of the Cretaceous normal faults on the formation of the Eocene (Pontide) fold-thrust belt structures in offshore Akçakoca-Amasra area, Western Black Sea basin, Turkey
Authors:
Özgür TÜRKMEN, İbrahim ÇEMEN
ABSTRACT
The Western Black Sea basin formed during therifting of the Moesian Platform in Early Cretaceous. The closure of the Neotethys Ocean in the Middle Eocene resulted in the formation of the Pontide fold and thrust belt in northern Turkey. During this study, eight seismic reflection profiles were interpreted to determine the subsurface structural geometry and tectono-stratigraphic evolution of the offshore Akçakoca-Amasra area. The stratigraphy of the study area is determined based on a composite wireline well log of the Akçakoca-1 wildcat well, which was also used to construct a velocity model based onsonic data. We suggest that a major décollement surface was developed during the Eocene Pontide Orogeny. The decollement is located at the limestone clay-shale intraformational transition within the Late Cretaceous (Maastrichtian) - Paleocene Akveren Formation. Normal faults formed during the Cretaceous rifting in the region are located below the décollement surface. They provide tectonic ramps along the décollement surface and allow the decollement to develop ramp-flat thrust fault geometry. A well-developed duplex structure is also present along the seismic lines. The décollement surface serves as the floor thrust of the duplex structure. The roof thrust of the duplex is in the Pliocene Sarıkum formation, dominantly composed of claystone.
https://doi.org/10.19111/bulletinofmre.777892
Deniz TİRİNGA, Bülent ATEŞÇİ, Yılmaz ÇELİK, Güvenç DEMİRKIRAN, Cahit DÖNMEZ, Aytekin TÜRKEL, Taner ÜNLÜ
Indexed In · Volume 161 / 2020
Geology and formation of Nevruztepe Fe-Cu skarn mineralization (Kayseri-Turkey)
Authors:
Deniz TİRİNGA, Bülent ATEŞÇİ, Yılmaz ÇELİK, Güvenç DEMİRKIRAN, Cahit DÖNMEZ, Aytekin TÜRKEL, Taner ÜNLÜ
ABSTRACT
The Nevruztepe iron-copper prospect is a skarn near Yeşilhisar (Kayseri). It has been overlooked as a potential producer of copper. The skarn was generated in Permian to Jurassic carbonate rocks by the Eocene Yahyalı granitic pluton. Lithologic units, including skarns, dip about 15 degrees southward. Skarns are both prograde (garnet and diopside) and retrograde (epidote); both exoskarn and endoskarn exist. Most of the magnetite is in a quartz-sulfide stage in retrograde skarn that is cut by veins and lenses containing quartz-pyrite-chalcopyrite. Granite and mineralized skarn are rare at the surface. From 2013 to 2015, 31 drill holes (totaling 6.178,5 m) encountered skarn to a depth of 450 m. Mineralized zones vary from 1,2 to 54,7 m thick. Fe mean grade ranges from 12% to 49%; mean copper grades vary from 10 to 4650 ppm. The deposit contains 5.096.788 tonnes of mineralized material. Microscopy on samples of drill core shows that the ore minerals are primarily magnetite, hematite, and chalcopyrite. Some magnetite is altered to hematite. Experiments show that with grinding to 100 microns the iron can be beneficiated to 66%. Waste from separation of the magnetite is 0.16 to 0.19% Cu; with flotation this was beneficiated to 19% Cu.
https://doi.org/10.19111/bulletinofmre.543189
Investigation on geoarchaeological structure of ancient ports in the Lycia Region
Authors:
Su Güneş KABAKLI, M. Erkan KARAMAN
ABSTRACT
The effects of geological events that occurred in ancient times, on ancient cities are undeniably great, so geoarchaeology has become an important mutidisciplinary science. Using geological methods in archaeological researchs offers a much more comprehensive understanding for history. Today, the methods of remote sensing and geographical information systems have facilitated archaeological researches to a greater extent than before. In this study, Phaselis, Andriake and Patara ancient cities were investigated. In the research, help was obtained from satellite images as a method. By comparing the ancient coast line and the modern coast line, it is tried to be understood to what extent the sea level change occurred.
https://doi.org/10.19111/bulletinofmre.545547
Usability of PC-ash as lightweight aggregate in foam concrete
Authors:
Metin DAVRAZ, Şemsettin KILINÇARSLAN
ABSTRACT
Foam concretes can be produced with aggregate or without aggregate. In this study, the possibility of using PC ash as lightweight aggregate in the production of foam concrete was investigated. Waste- PC ash is emerging from the pulverized coal furnace about 10 tons/day in a textile factory located in the vicinity of Dinar (Afyonkarahisar). The chemical properties, particle size distribution and grain densities of PC-ash were determined. Foam concrete with a dry density of 450 kg/m3 at a cement dosage of 250 kg/m3 and w/c:0.65 was produced after the aggregate analysis. The PC-ash which is used in foam concrete mix is between 0 and 200 kg/m3. 100 mm cube and 300x300x50 mm prism samples were prepared with this foam concrete. The compressive strengths of the cube samples and the thermal conductivity coefficient of the prism samples were tested at the 28th day. The average compressive strength of foam concrete samples with a density of 452 kg/m3 was determined as 1.07 MPa and the thermal conductivity coefficient was determined as 0.097 W/mK. As a result, it has been determined that PC-ash as lightweight aggregate can be successfully used in production of precast element and light floor-screed.
https://doi.org/10.19111/bulletinofmre.545562
Keywords:
Foam concrete, Lightweight aggregate, PC ash, Compressive strength, Thermal conductivity.