Home›Role of the Cretaceous normal faults on the formation of the Eocene (Pontide) fold-thrust belt structures in offshore Akçakoca-Amasra area, Western Black Sea basin, Turkey
Article Details
Role of the Cretaceous normal faults on the formation of the Eocene (Pontide) fold-thrust belt structures in offshore Akçakoca-Amasra area, Western Black Sea basin, Turkey
BULLETIN OF THE MINERAL RESEARCH AND EXPLORATION (MTA Dergisi)
Article Details
Role of the Cretaceous normal faults on the formation of the Eocene (Pontide) fold-thrust belt structures in offshore Akçakoca-Amasra area, Western Black Sea basin, Turkey
The Western Black Sea basin formed during therifting of the Moesian Platform in Early Cretaceous. The closure of the Neotethys Ocean in the Middle Eocene resulted in the formation of the Pontide fold and thrust belt in northern Turkey. During this study, eight seismic reflection profiles were interpreted to determine the subsurface structural geometry and tectono-stratigraphic evolution of the offshore Akçakoca-Amasra area. The stratigraphy of the study area is determined based on a composite wireline well log of the Akçakoca-1 wildcat well, which was also used to construct a velocity model based onsonic data. We suggest that a major décollement surface was developed during the Eocene Pontide Orogeny. The decollement is located at the limestone clay-shale intraformational transition within the Late Cretaceous (Maastrichtian) - Paleocene Akveren Formation. Normal faults formed during the Cretaceous rifting in the region are located below the décollement surface. They provide tectonic ramps along the décollement surface and allow the decollement to develop ramp-flat thrust fault geometry. A well-developed duplex structure is also present along the seismic lines. The décollement surface serves as the floor thrust of the duplex structure. The roof thrust of the duplex is in the Pliocene Sarıkum formation, dominantly composed of claystone.
Investigation of the paleodepositional environment of the middle Miocene aged organic matter rich rocks (Tavas/Denizli/SW Turkey) by using biomarker parameters and stable isotope compositions (¹³C and ¹⁵N)
Authors:
Demet Banu KORALAY
ABSTRACT
The study area is located 45 km south of Denizli. The purpose of this study is to identify the organic geochemical properties and paleo depositional environment of organic matter rich rocks from Tavas (Denizli/SW Turkey). For this purpose, total organic carbon (TOC, wt.%) and pyrolysis, n-alkane, isoprenoid, sterane, terpane and aromatic hydrocarbon parameters have been investigated of the studied samples. In addition, scanning electron microscopy (SEM) and stable isotope (δ¹³C and δ¹⁵N) investigations were also carried out. Organic matter rich rocks which have type III kerogen have got 25.80 and 44.00 wt.% TOC content. Hydrogen index (HI, 73 and 120 mg HC/g TOC) and Oxygen index (OI, 34 and 59 mg CO /g TOC) values of samples are very low. The values of δ¹³C and δ¹⁵N show the terrestrial C3 ecosystem. The predominance of high molecular weight n-alkanes, degree of waxiness and less dibenzothiophene (DBT) concentrations indicate terrestrial organic matter. At the same time, biomarker and pyrolysis parameters indicate that the organic matter rich rocks (Tavas/Denizli) are in the immature stage. Pr/Ph, C /C homohopane biomarker ratios and C35
https://doi.org/10.19111/bulletinofmre.742127
Some criteria used in determining paleoshorelines, examples from Turkey and Rhodes Island
Authors:
Okan TÜYSÜZ
ABSTRACT
Shorelines are important boundaries separating the erosional and the depositional areas. Determining the location of the shorelines in geological time sand how it changes by the time is one of the major problems of geology. The most accurate estimate of the location of the shoreline, which is a dynamic structure, in the period when it was exist is very important in palaeogeographic studies. The determination of coastal changes by the time provides valuable information on active tectonic sand climate, and the relationships between these two. The most basic approach to determine the paleoshoreline is to estimate the geological events on the sea and land sidesand thus to estimate the location of it indirectly. For this purpose, if the physical, chemical and biological conditions of the depositional environments from land to shore and from there to the basin and which land part and how fed this environment can be revealed, the location of the shoreline can be estimated. Incontrast, some field observations provide direct and much more precise data for identifying the paleoshorelines. In this paper, it will be introduced how somerock-boring organisms, wave-cut feature sand coastal sediments can be used to estimate the paleoshorelines based on two examples of Quaternary sediments in Hatay and Rhodes Island along th Mediterranean coastand on some Eocen esediments in the vicinity of Çorum, Central Anatolia.
https://doi.org/10.19111/bulletinofmre.712862
Keywords:
Paleoshoreline, Sealevelchange, Rock boring organisms, Coastal morphology, Eocene and Quaternary coastal sediments.
In this study, leaching experiments were performed for extraction of magnesium from a chromite beneficiation plant tailing predominantly containing lizardite. The X-ray fluorescence (XRF) and X-ray diffraction (XRD) analyzes showed that the tailing sample contains 39.3wt.% MgO and consist of predominantly lizardite mineral. Hydrochloric acid (HCl) and sulphuric acid (H₂SO₄) were used as acids separately in leaching experiments. Acid concentration, leaching temperature, leaching time, and solid ratio were investigated as leaching parameters and optimized. Maximum magnesium extraction yield was determined to be nearly 98% for both acids under optimum leaching parameters which leaching temperature was 85°C, solid ratio was 20wt.%, leaching time was 120 minutes, and acid concentrations were 6 M for HCl and 4 M for H₂SO₄. In addition, it was determined that the leaching residue as a solid state was mainly composed of amorphous silicate according to the XRD analysis. Dissolution rate data were explained using Jander equation. Mg dissolution process found to be diffusion controlled.
https://doi.org/10.19111/bulletinofmre.827630