Latest Pliocene-Quaternary uplift of the central Tauride and Evolutionary history of the Kızıllar Canyon, southern central Anatolia-Türkiye
Authors:
Ali KOÇYİĞİT, Uğur DOĞAN
ABSTRACT
The study area is located near the apex of the north-facing and V-shaped Konya-Niğde Graben. Its south-southeast margin is defined and controlled by the NE-trending Karaman-Niğde Fault Zone. It also forms the geographic boundary between the central Tauride in the south and central Anatolia in the north. This study aimed to determine the Latest Pliocene-Quaternary uplift rate of the central Tauride and the evolutionary history of the Kızıllar Canyon located on the uplifting southern footwall block of the Karaman Niğde Fault Zone. Both the geological and geomorphological field data, which were obtained within the framework of this study, revealed the following: (1) the Kızıllar River drainage system developed as a result of several capture events; (2) Lithological and hydrological characteristics of the valley reveal the reason for the lack of gradation in the river’s longitudinal profile; (3) the Kızıllar Canyon reflects the incision process of the Kızıllar River; (4) the Kızıllar River cut vertically into its bed up to 230 m, which corresponds to the minimum Latest Pliocene- Quaternary uplift rate of the central Tauride (~0.06 mm/yr); and (5) the Kızıllar Canyon developed as a natural response of the river to the uplift of the Konya-Niğde Fault Zone footwall block.
Keywords:
Kızıllar Canyon, Central Taurides, Central Anatolia, Fault, Uplift Rate
The Paleocene-Eocene succession at Djebel Onk, northeastern Algeria, remains poorly understood, despite its significance for reconstructing paleoenvironments during a critical period of global change. Unlike the well-studied equivalent series in the Metlaoui-Gafsa Basin, the Algerian counterpart lacks a robust stratigraphic and paleoenvironmental framework. This study addresses this gap by applying detailed sedimentological and petrographic analyses, integrated with sequence stratigraphic principles based on the model of Vail. Five erosional surfaces delineate five truncated depositional sequences, each containing only a transgressive and highstand systems tract, indicating repeated interruptions in sedimentation. Eight lithofacies were identified, reflecting deposition along a carbonate ramp system that ranges from outer ramp to restricted lagoonal and tidal flat settings. These facies transitions reveal shifts between transgressive and regressive phases, including a notable phosphatic-rich interval and an upper evaporitic horizon. The uppermost sequence is interpreted as an inner ramp deposit from the terminal Ypresian to early Lutetian. Stratigraphic correlation with distal, pelagic facies supports this age assignment. The integration of facies architecture with the influence of eustatic and tectonic controls allowed identification of two second-order tectonoeustatic cycles. This refined framework enhances regional correlation of Paleocene-Eocene deposits in North Africa and underscores the complex stratigraphic evolution of the Kef Essnoun section.
Keywords:
Paleocene-Eocene, Sequence Stratigraphy, Carbonate Ramp, Facies Analysis, Djebel Onk
A thorough comparison of newly discovered whetstone from the Dazkırı (Afyonkarahisar – Türkiye) with a heritage whetstone from the Cretan Island-Greece with regards to mineralogical, petrographic and physico-mechanical characteristics
Authors:
Osman Serkan ANGI, Orhan YAVUZ, Emin ÇİFTÇİ
ABSTRACT
The present study is an analytical investigation into the geomaterial and engineering geological characteristics of Cretan (Greece) and Dazkırı (Afyonkarahisar, Türkiye) whetstones. The Cretan whetstone, a prominent example of a heritage natural whetstone, is a distinctive type of carbonatecemented siltstone that is extracted from the island of Crete in Greece. Conversely, a new specimen was recently identified by the authors and designated as “the Dazkırı whetstone,” which exhibits comparable lithology and is extracted in the Dazkırı district of Afyonkarahisar (Türkiye). In order to ascertain the geomaterial characteristics of the studied whetstones, a number of analytical and test techniques were utilized. Furthermore, Cerchar Abrasivity Index (CAI) measurements were conducted and acquired. The CAI results were then compared through the use of regression equations related to quartz content, cementation degree, and the Böhme surface abrasion resistance. The oil absorption test was finally conducted to ascertain the grinding-honing performances and impregnation capacity with lubricant of the examined whetstones. Consequently, a comparative analysis of the subject whetstones was conducted, resulting in the definition and classification of their characteristics. These characteristics included the relationship between grain size and grit size equivalent, as well as the type of lubricant, function, and uses. In summary, the Dazkırı whetstone exhibits superior geomaterial characteristics and grinding-honing performance when compared to the Cretan whetstone.
Keywords:
Whetstone, The Cretan Whetstone, The Dazkırı Whetstone, Geomaterial Characteristics, Grinding- Honing Performances.
THE METAMORPHISM AND THE RELATIONSHIP BETWEEN INFRA AND SUPRASTRUCTURES OF THE BİTLİS MASSIF – TURKEY
Authors:
Metin ŞENGÜN
ABSTRACT
The infrastructure of the massive consists essentially of amphibolites, gneisses and micaschists intruded by a biotite granite and the successive hololeucocratic phase. The mantling rocks of the suprastructure comprise metapelitic rocks unconformably underlying metacarbonates dated as Middle Devonian- Mesozoic. The infra-suprastructure boundary is interpreted as a surface of transgressive overlap. The rocks of infra and suprastructure are involved in isoclinal folds with ductile deformation along most of the boundary conclusively suggesting in situ position of the suprastructure during the Alpine deformation. The shear planes are discontinous, en echelon and run independently of the infra-suprastructure boundary. A uniform sequence of Palaeozoic rocks, which is not intruded by the granites of the infra-structure, together with the infra-suprastructure boundary being a sedimentary contact, are conclusive evidence for the existence of a Precambrian event. Eradication of Precambrian paragenesis occurs in the flanks of major folds where a complete Alpine zoning exists from very low grade to anatectic conditions as exemplified by the Kesandere section in contrast to the preservation of Precambrian parageneses in the unsheared competent rocks of the infrastructure of the hinge areas. There is no gap in physical conditions with regard to a single episode of deformation. The gap occurring between the infra and the suprastructure is due to different physical conditions of Precambrian and Alpine deformations. Retrograde effects are presumably due to an Alpine imprint on the Precambrian parageneses, whereas they are attributed to a continuous process of deformation with contemporaneous uplift and progressive diminution of physical conditions in the case of imprint on early Alpine parageneses. The interpretation herein presented in relation to nature of infra and suprastructure boundary and metamorphism of Bitlis massive is consistent, for all aspects, with the regional geologic data showing that it is the deformed Alpine passive margin of the Arabian plate.
TWO NEW SPECIES OF CAPRINIDAE FROM THE BAYBURT AREA (EASTERN BLACK SEA, TURKEY)
Authors:
Sacit ÖZER, Mükerrem FENERCİ
ABSTRACT
Two new species of Caprinidae Sabinia ornata n. sp. and Mitrocaprina madeniana n. sp. have been described from the Maastrichtian sandy limestones of Maden (Bayburt) area.