Kahramanmaraş, Manuscript, Intensity, Historical Earthquake, East Anatolian Fault Zone.
Abstract:
Significant tectonic structures observed in the vicinity of Kahramanmaraş are the northern branch of the East Anatolian Fault Zone (EAFZ) (Sürgü segment, Çardak segment, Savrun segment, Çokak segment and Toprakkale segment), the southern branch of EAFZ (Gölbaşı segment and Amanos segment), Engizek Fault Zone, Kahramanmaraş Fault Zone and Narlı segment of the Dead Sea Fault Zone (DSFZ). The manuscript in which the 1795 Kahramanmaraş Earthquake has been mentioned is kept in the work of art called “Divan-ı Hasmi” in the Koyunoğlu Library of the Konya Metropolitan Municipality. From the statements in the work the intensity of the earthquake is 8,0 and due to this fact the magnitude of the earthquake was estimated as 7,0. The estimations made reinforce the probability that the earthquake occurred on Gölbaşı segment of the EAFZ
Deniz TİRİNGA, Nihat YILDIRIM, Ali DEMİR, M. Remzi AYTAÇ
Indexed In · Volume 178 / December 2025
A contribution to the formation of the Karadut Iron Deposit (Kahramanmaraş-Göksun) and its surrounding mineralizations with new findings
Authors:
Deniz TİRİNGA, Nihat YILDIRIM, Ali DEMİR, M. Remzi AYTAÇ
ABSTRACT
Karadut iron mineralization, situated between the Göksun and Elbistan districts in the Eastern Taurus. Many large and small iron deposits and mineralization are distributed across a 40-kilometer region south of the Sürgü fault. These mineralizations are notable not only for their high-grade ore but also for how they are formed. This study aims to investigate these mineralizations by analyzing their mineralogical characteristics and examining their spatial and temporal relationships with host rocks through field observations. Karadut iron mineralization comprises two primary types: metamorphic banded magnetite and hydrothermal hematite-goethite. Metamorphic banded mineralizations, observed as numerous deposits, offer small-scale reserves. Magnetites are aligned parallel to the lamination within micaschists, with thicknesses ranging from 1 cm to 10 m. Near-surface magnetites exhibit hematite formation via martitization, accompanied by supergene limonite formations. Analyses of outcrop and core samples reveal iron contents ranging from 34.20% to 85.14% Fe2O3. This study provides the first detailed exploration of hydrothermal-type mineralizations in high-altitude areas with limited accessibility. Mineralization developed along karstic voids and tectonic lines, primarily consisting of hematite and goethite, with barite as a gangue mineral. Outcrop samples indicate iron contents reaching 85.6% Fe2O3.
Usability value of the Yenicekale formation exposure around the Pazarcık (Kahramanmaraş) as a cement raw material
Authors:
Güldemin DARBAŞ, Fatma BAYRAK, Ali GÜREL
ABSTRACT
The study area is located around Pazarcık - Narlı, Kahramanmaraş province. The aim of the study is to investigate the value of units belonging to the Yenicekale Formation Kışla Marl Member as cement raw material. As a result of XRD studies, it was determined that Yenicekale formation Kışla Marn Member which is exposed to large areas in the region is composed of illite, quartz, dolomite, calcite, and chlorite minerals by rock analyzed. By geochemical analysis, SiO2, Al2O3, Fe2O3, CaO, MgO, K2O, Na2O, SO3 contents of the units were determined and these values were compared with the limit values used in cement raw materials. When the results were evaluated, it was determined that the total alkali elements (Na2O+ K2O) were within the limit values, but others were below or above these limit values. In addition, with geochemical analyses, it was calculated Silicate and Aluminium Modules. The most suitable values for Silicate Modules in Turkish Cement Factories are 2.2 - 2.6. In this study, Silicate Modulus values are in the range of 1.94 - 5.22. Standard values or Aluminum are between 1.5 and 2.5. The values of Aluminum Modules determined in this study are in the range of 0.43 - 1.38. For Hydraulic Module, the standard values are in the range of 1.8 - 2.2. The values determined in this study are in the range of 0.24 - 5.
https://doi.org/10.19111/bulletinofmre.856536
The relation of seismic velocity and attenuation pattern in the East Anatolian fault zone with earthquake occurrence: Example of January 24, 2020 Sivrice earthquake
Authors:
Şakir ŞAHİN, Erdinç ÖKSÜM
ABSTRACT
The East Anatolian Fault Zone (EAFZ) is one the main tectonic elements of Turkey, which borders the Anatolian plate from the east. EAFZ, which is NE - SW direction, consists of many fault segments. In the historical and instrumental period, many damaging earthquakes occurred, the largest being 6.8 (Ms) as the 1971 Bingöl earthquake. The last magnitude 6.6 (Ml) (Mw=6.8) earthquake occurred on January 24, 2020 in Elazığ-Sivrice Hazar-Sincik segment of EAFZ. However, considering the historical and instrumental activity, it is seen that many fault segments are silent. In this study, the silent and active segments, and their seismic velocity (as % Vp and Vp) and attenuation pattern (as Q-1 p) are determined in order to determine the earthquake behavior of EAFZ in the near future. From the results obtained by using the data of the earthquakes that occurred from 2007 to the end of 2019, it was clearly determined that the velocity and attenuation increased on the Hazar-Sincik segment. It has been determined that Vp is 4.08-8.2 km/sec, Q-1 p is ± 0.005 and the frequency dependency varies between 0-1.08 along the zone. The variation of velocity and attenuation on the segments where the earthquake occurred and in the silent section were revealed.
https://doi.org/10.19111/bulletinofmre.824032
APPLICATION OF TILT ANGLE METHOD TO THE BOUGUER GRAVITY DATA OF WESTERN ANATOLIA
Authors:
Fikret DOĞRU, Oya PAMUKÇU, İlkin ÖZSÖZ
ABSTRACT
In this study, tilt angle method was applied to Western Anatolia gravity data in order to estimate edges of the geological structures. Tilt angle was obtained in two different ways by using gravity and its vertical derivative. In potential field methods, tilt angle technique is expressed as the ratio of vertical derivative to horizontal derivatives of anomaly. In the tilt angle map, 0° contours defines structure edges, half of the distance between ±45° defines depth of upper structure. In the field work of the study, gravity data, which was measured in Western Anatolia, was used to obtain regional anomaly maps and tilt angle and tilt angle of vertical directional derivative were applied to these maps. A significiant difference was observed between western and eastern parts of the N-S striking line, througout 28o longitude, from the results of tilt angle which was obtained by applying upward continuation method (50, 75 and 100 km) to the Bouguer anomaly. Same difference was determined from the results of vertical derivative of tilt angle which was obtained from upward contuniation of Bouguer anomaly. Depth values were obtained from the results of tilt angle and vertical derivative of tilt angle methods between 7 and 43 km in study area. The obtained results were compared with geological structural boundary and possible depths of geological discontinuities were estimated. In addition, obtained results were investigated with seismic activity in the study area and compared with previous geological and geophysical studies.
DOI: 10.19111/bulletinofmre.305177
The Late Jurassic aged Lisar granite in North Iran is in tectonic contact of the form of thrust and strike slip faults with Upper Cretaceous sandy limestone and is covered by Paleogene polygenetic conglomerate in the Talesh Mountain at the western continuation of the Alborz range. The rock samples of the granite are pink coloured and coarse-gained with K-feldspar, quartz, plagioclase, biotite and amphibole. The Lisar granite is more likely emplaced in an extensional environment indicated with numerous space filling silica-rich aplitic veins in the rocks. The granite samples are moderately altered and feldspars are changed to sericite and clay minerals and biotite is partially converted to chlorite. The Lisar granite has derived from a high K magma and is A-type in nature, belonging to A2 subgroup. The rock samples of granite are characterized by distinct negative Eu anomaly and a decrease from LREE to HREE contents. The parental melts of the granite were generated from partial melting of a lower continental crustal source with possible contribution from the mantle materials. The Lisar granite represents Cimmerian post-collision magmatism in north Iran following closure of Palaeotethys Ocean and subsequent collision.
DOI: 10.19111/bulletinofmre.336499
Keywords:
A-type granite,Palaeotethys,Post-collision,Cimmerian,Talesh,, North Iran
GEOCHEMICAL CHARACTERISTICS AND RARE-EARTH ELEMENT DISTRIBUTIONS OF KOZBUDAKLAR W-SKARN DEPOSIT (BURSA, WESTERN ANATOLIA)
Authors:
Ayşe ORHAN, Halim MUTLU
ABSTRACT
The Kozbudaklar W-skarn deposit occurs along the contact between Eocene Topuk Granitoid and Triassic İnönü Marble in Tavşanlı Zone. In the study area, the endoskarn is represented by plagioclase-pyroxene and exoskarn zone which is characterized by pyroxene, pyroxene-garnet, garnet and garnet-pyroxene skarn facies. According to major oxide element contents, exoskarn is of calcic character. In pyroxene and pyroxene-garnet skarn facies, tungsten and molybdenum abundances vary between 434-5507 ppm (mean 2330 ppm) and 8 - 90 ppm (mean 40 ppm). In the garnet and garnet-pyroxene skarns, concentrations of these elements are 271 - 7616 ppm (mean 2486 ppm) and 7 - 493 ppm (mean 107 ppm), respectively, and molybdenum concentration is increased. ƩREE contents of the Topuk Granitoid, endoskarn, exoskarn and İnönü Marble are in the range of 75.8 to 158.9 ppm (mean 106.2 ppm), 75.8 to 171.5 ppm (mean 114.6 ppm), 3.5 to 290.8 ppm (mean 48.7 ppm) and 2.3 to 15.3 ppm (mean 6.1 ppm), respectively. Although ƩREE concentrations of skarn zones are higher than those of Topuk Granitoid and İnönü Marble, ƩREE concentrations of tungsten-rich samples are significantly depleted. In areas of scheelite mineralization, REE trends and Eu anomalies display two different patterns. REE trends, HREE enrichments and negative Eu anomalies of pyroxene and pyroxene-garnet skarn facies exhibit similarities with Topuk Granitoid. In these skarn, tungsten-rich samples are represented by a Ce depletion and low Eu/Eu* (Eu/Eu* = 0.56-0.88). Garnet and garnet-pyroxene skarn facies are characteristic with a convex LRRE pattern, maximum Pr and Nd concentrations and positive Eu anomalies. Ce-enrichment and high Eu/Eu* ratios (Eu/Eu* = 1.45 - 4.18) are observed in tungsten-rich samples. Considering the molybdenum enrichments and REE pattern, scheelite mineralization in the Kozbudaklar W-skarn deposit can be said to have developed at two different high temperature phases. In the first-phase mineralization was formed by early magmatic fluids under moderate oxidant conditions whilst the second-phase scheelite mineralization was formed under increasing oxidant conditions.
DOI: 10.19111/bulletinofmre.305992