Ancient Metallurgy, Geology, Archaeology, Anatolia, Turkey
Abstract:
Geological and archaeological research on ancient mining and metallurgy are actually targeting the same goals: understanding the nature and value of a mining operation. Geologists are intent on locating and qualifying ores and minerals for future use, whereas archaeologists strive to link ores to relevant historic and prehistoric metal artifacts and activities. This article discusses research into ancient Anatolian metallurgy by underscoring the overlap between geological and archeological practices. The work of archaeologists and geologists can be mutually beneficial through a close collaboration on the collection and analysis of field data. Their accumulated and combined knowledge would accelerate the progress towards placing ancient mining activities in a chronological and meaningful context.
Latest Pliocene-Quaternary uplift of the central Tauride and Evolutionary history of the Kızıllar Canyon, southern central Anatolia-Türkiye
Authors:
Ali KOÇYİĞİT, Uğur DOĞAN
ABSTRACT
The study area is located near the apex of the north-facing and V-shaped Konya-Niğde Graben. Its south-southeast margin is defined and controlled by the NE-trending Karaman-Niğde Fault Zone. It also forms the geographic boundary between the central Tauride in the south and central Anatolia in the north. This study aimed to determine the Latest Pliocene-Quaternary uplift rate of the central Tauride and the evolutionary history of the Kızıllar Canyon located on the uplifting southern footwall block of the Karaman Niğde Fault Zone. Both the geological and geomorphological field data, which were obtained within the framework of this study, revealed the following: (1) the Kızıllar River drainage system developed as a result of several capture events; (2) Lithological and hydrological characteristics of the valley reveal the reason for the lack of gradation in the river’s longitudinal profile; (3) the Kızıllar Canyon reflects the incision process of the Kızıllar River; (4) the Kızıllar River cut vertically into its bed up to 230 m, which corresponds to the minimum Latest Pliocene- Quaternary uplift rate of the central Tauride (~0.06 mm/yr); and (5) the Kızıllar Canyon developed as a natural response of the river to the uplift of the Konya-Niğde Fault Zone footwall block.
Keywords:
Kızıllar Canyon, Central Taurides, Central Anatolia, Fault, Uplift Rate
The Dodurga Fault is an active right-lateral strike-slip fault, approximately 63 km long, striking NW-SE in northwestern Anatolia. Based on 1:25,000-scale active fault mapping, the fault is subdivided into two principal geometric segments. Segment 1 is approximately 16 km long and extends from Sulhiye in the west to Erikli in the east, whereas Segment 2 is 47 km long and is characterized by a right-stepping geometry and a 10°-15° southeastern deflection. Geological and geomorphological observations, together with kinematic analyses, indicate that the fault is dominantly right-lateral strike-slip in character. Stream channels offset by up to several kilometers along the fault trace support its long-term activity, and fault-plane kinematic indicators independently confirm dextral motion. Paleostress analyses of the kinematic data indicate that the recent deformation phase along the Dodurga Fault is governed by approximately N-S contraction and E-W extension. Empirical scaling relationships suggest that Segment 1 and Segment 2 are capable of generating earthquakes of Mw 6.47 and Mw 6.97, respectively. If both segmentsrupture together, the Dodurga Fault could potentially generate an earthquake of Mw 7.16.
David I. BLUASHVILI, Kerem M. AVCI, Keti BENASHVILI, Giorgi MINDIASHVILI, Revaz MENABDE, Vakhtang BLUASHVILI
Indexed In · Volume 180 / August 2026
General geology and integrated ASTER-based lineament and hydrothermal alteration mapping of the Zoti Ore Field (Guria, Western Georgia)
Authors:
David I. BLUASHVILI, Kerem M. AVCI, Keti BENASHVILI, Giorgi MINDIASHVILI, Revaz MENABDE, Vakhtang BLUASHVILI
ABSTRACT
The Zoti ore field, located in the Guria region of western Georgia within the Lesser Caucasus metallogenic belt, hosts iron-gold-copper mineralization related to volcanic-sedimentary sequences and intrusive bodies. This study aims to delineate potential mineral anomalies and evaluate their structural controls using remote-sensing techniques. Terra ASTER (AST_L1B 00309232004081235) imagery acquired on 4 March 2024 was utilized. The dataset exhibits less than 5% cloud and snow cover, while vegetation density is moderate. After applying radiometric and atmospheric corrections and NDVI-based masking, the data were prepared for image processing. Image analyses were conducted using ENVI 4.8, ERDAS IMAGINE 2022, and ArcMap 10.8.2. Band-ratio techniques were implemented in ENVI, lineament extraction was performed in ERDAS IMAGINE, and final mineral anomaly maps were generated in ArcMap. Lineament analysis indicates dominant structural trends subparallel to the Lesser Caucasus, exerting significant control on the spatial distribution of argillic-phyllic alteration zones and iron-oxide anomalies. Hematite and metabasalt anomalies are mainly concentrated in the southern and southeastern parts of the study area. Furthermore, iron-oxide, alunite, clay, muscovite, calcite, kaolinite, and sericite anomalies show a strong spatial association with the Natanebi River corridor. Intense Fe-oxide and Al-OH alteration zones coincide with known mineral prospects and extend into previously unexplored structural domains,highlighting promising targets for future field investigations.
LATE CENOZOIC EXTENSIONAL TECTONICS IN WESTERN ANATOLIA: EXHUMATION OF THE MENDERES CORE COMPLEX AND FORMATION OF RELATED BASINS
Authors:
GUROL SEYITOGLU, VEYSEL ISIK
ABSTRACT
The Aegean region (Western Anatolia, Aegean Sea and Greece) is one of the areas of the earth under the effect of extensional tectonics and includes the typical features of core complexes in this type of region. The Menderes Massif in Western Anatolia was exhumed initially as an asymmetric core complex in the Early Miocene due to extension beginning in the Oligocene and then the central Menderes Massif was further exhumed as a symmetric core complex. This article discusses the exhumation mechanisms of the Menderes Massif and development of surrounding sedimentary basins in light of new findings. The proposed model successfully explains, the location of the Oligocene Kale basin, different movement directions of the Lycian nappes in northern and southern parts of the Datça-Kale Main Breakaway Fault and the top-to- the NNE directed shearing dominantly observed in the whole Menderes Massif
GEOLOGICAL FEATURES OF NEOGENE BASINS HOSTING BORATE DEPOSITS: AN OVERVIEW OF DEPOSITS AND FUTURE FORECAST, TURKEY
Authors:
Cahit HELVACI
ABSTRACT
The geometry, stratigraphy, tectonics and volcanic components of the borate bearing Neogene basins in western Anatolia offer some important insights into on the relationship between basin evolution, borate formation and mode of extension in western Anatolia. Some of the borate deposits in NE-SW trending basins developed along the ‹zmir-Bal›kesir Transfer Zone (‹BTZ) (e.g. Bigadiç, Sultançay›r and Kestelek basins), and other deposits in the NE-SW trending basins which occur on the northern side of the Menderes Core Complex (MCC) are The Selendi and Emet basins. The K›rka borate deposit occurs further to the east and is located in a completely different geological setting and volcanostratigraphic succession. Boron is widely distributed; including in soil and water, plants and animals. The element boron does not exist freely by itself in nature, but rather it occurs in combination with oxygen and other elements in salts, commonly known as borates. Approximately 280 boron-bearing minerals have been identified, the most common being sodium, calcium and magnesium salts. Four main continental metallogenic borate provinces are recognized at a global scale. They are located in Anatolia (Turkey), California (USA), Central Andes (South America) and Tibet (Central Asia). The origin of borate deposits is related to Cenozoic volcanism, thermal spring activity, closed basins and arid climate. Borax is the major commercial source of boron, with major supplies coming from Turkey, USA and Argentina. Colemanite is the main calcium borate and large scale production is restricted to Turkey. Datolite and szaibelyite are confined to Russia and Chinese sources. Four Main borax (tincal) deposits are present in Anatolia (K›rka), California (Boron), and two in the Andes (Tincalayu and Loma Blanca). K›rka, Boron and Loma Blanca have similarities with regard to their chemical and mineralogical composition of the borate minerals. Colemanite deposits with/without probertite and hydroboracite are present in west Anatolia, Death Valley, California, and Sijes (Argentina). Quaternary borates are present in salars (Andes) and playalakes and salt pans (USA-Tibet). Boron is a rare element in the Earth’s crust, but extraordinary concentrations can be found in limited places. The formation of borate deposits can be classified as follows: a skarn group associated with intrusives and consisting of silicates and iron oxides; a magnesium oxide group hosted by marine evaporitic sediments; and a sodium– and calcium–borate hydrates group associated with playa-lake sediments and explosive volcanic activity. Some conditions are essential for the formation of economically viable borate deposits in playa-lake volcano-sedimentary sequences: formation of playa-lake environment; concentration of boron in the playa lake, sourced from andesitic to rhyolitic volcanics, direct ash fall into the basin, or hydrothermal solutions along graben faults; thermal springs near the area of volcanism; arid to semi-arid climatic conditions; and lake water with a pH of between 8.5 and 11. A borate is defined as any compound that contains or supplies boric oxide (B2O3). A large number of minerals contain boric oxide, but the three that are most important from a worldwide commercial standpoint are borax, ulexite, and colemanite, which are produced in a limited number of countries. Turkey has the largest borax, ulexite and colemanite reserves in the world and all the world’s countries are dependent upon the colemanite and ulexite reserves of Turkey. Most of the world’s commercial borate deposits are mined by open pit methods. Brines from Searles Lake, and presumably the Chinese sources, are recovered by either controlled evaporation or carbonation. Boric acid is one of the final products produced from most of the processes. Further research on the mineralogy and chemistry of borate minerals and associated minerals will the production and utilization of borate end-products. Many modern industries need industrial borate minerals, and many people use their products. In addition, boron is essential to plant life, and by extension, all life so it’s hard to imagine our world without using it. Therefore, borates and their products are critical to the Sustainable Development of the world.
Keywords:
Neogene borate basins, İzmir-Balıkesir Transfer Zon, Menderes Metamorphic Complex, Borate Deposits, Overview of Deposits, Future Forecast, West Anatolia.
The tectonic regime of Eastern Anatolia is determined by Arabian-Eurasian continentcontinent convergence and the mechanism occurred with the convergence. North Anatolian Fault Zone (NAFZ), Eastern Anatolian Fault Zone (EAFZ), North Eastern Anatolian Faults and Bitlis Zagros Suture Zone are formed by this convergence, represent the characteristic of lithospheric structure of the region. In the scope of this study, the gravity anomalies of Eastern Anatolia were used for investigating the lithospheric structure. Firstly, second order trend analyses were applied to gravity data for examining the characteristic of the anomaly. Later, the vertical and horizontal derivatives methods were applied to the same data. Generally, the purpose of the applying derivative methods is determining the vertical and horizontal borders of the structure. Therefore, this method gives the opinion about the characteristic of the lithospheric structure of the study region. According to the results of derivative methods, the structure transitions were increased rather especially with Bitlis Zagros Suture Zone. At the last step, the gravity studies were evaluated together with the seismic activity of the region. Consequently, the geodynamical structure of the region is examined with the previous studies done in the region.