Volume 148 · 2014 · 8 ARTICLES
All Articles In This Issue
01
Indexed In · Volume 148 / 2014
POSSIBLE INCISION TIME OF THE LARGE VALLEYS IN SOUTHERN MARMARA REGION, NW TURKEY
Authors: ABSTRACTSurface water and sediments derived from the southern Marmara region (= Susurluk
Drainage basin- SDH) transport to lakes Manyas and Ulubat first and then go to the Sea of
Marmara via the Kocasu River only. The present drainage system of the SDH provides a good
opportunity to study erosion rate and subsequently occurrence times of large-scale valleys in
the region. To achieve it, depositional characteristics and ion contents of the ancient
lacustrine sediment has been investigated and re-interpreted using cores taken from Lake
Ulubat. The boron content of these sediments increased upward suddenly at the 4 m level,
most probably due to starting of erosion at Emet borate beds in the drainage basin. Taking
into consideration equilibrium between natural erosion and sedimentation, the incision rate
in the Emet valley was found 1.4 cm.yr-1. From here one can calculate a time span of 75 ky
for the formation of the whole valley itself. However, it is known that working of the geological
processes was not monotonous in the past; hence, this date is not absolute. Newertheless,
formation of the large valleys of the southern Marmara region shouldn’t be older than 300
kyrs. An important reason on rapid erosion was likely lowered base-level as the Marmara Sea
was a closed lake during the last Glacial Period. High altitudinal difference between source
and depositional areas caused acceleration of the erosion.
Keywords:
02
Indexed In · Volume 148 / 2014
TECTONO - SEDIMENTARY EVOLUTION OF BUCAKKIfiLA REGION (SW KARAMAN) IN CENTRAL TAURIDES
Authors: ABSTRACTThe study area located in Bucakk›flla region in Central Taurides consists of rock units of the
melange which form Bozk›r unit of the Tauride units and the overlying cover rocks. There are
volcanic, ophiolitic and sedimentary rocks which generated in different environmental
conditions. These rock groups comprise units which formed in Middle-Upper Triassic-
Paleocene periods in Inner Tauride Ocean that had been opened between Tauride – Anatolide
continents. Within the scope of this study, lithostratigraphic characteristics of Hu¤lu, Boyal›
tepe (hill), Korualan nappes and cover rocks which form Bozk›r Unit and tectono sedimentary
evolution of the study area was built up by paleontological and structural features. Due to
rifting, which started in Middle Upper Triassicin the region, the products of the rift volcanism
in rifting center and the carbonate deposition on margins of basin have occurred. Thecontinuation of extension which initiated rifting caused collapse in the basin in Middle Upper
Triasic – Lower Senonian. Deep marine deposition has occurred at the center of basin,
however pelagic and neritic limestones were deposited in basin margins during this time. The
region has become compressed by the effect of a new tectonical regime which had been
effective starting from Santonian. This compression caused new complexes to take place due
to reverse faults and thrust. The formation of these complexes has continued until the end of
Eocene period. However, there has not been observed any formation depending on the
compression in post Paleocene. The nappes have moved southward by the effect of
compression until Eocene. But then, these nappes could not advance forward anymore so,
northward back thrusts took place as basin was closured andreached the collisional stage.
Sequences which had become imbricated structures by back thrusts were subjected to
collapsing by the stop of compression and the gravitational effect. All sequences in the
imbricated structure were cut by dip slip normal faults and lacustrine basins were formed on
fallen blocks. The formation of Early Oligocene terrestrial deposits in these lakes indicates
that the collapse occurred in Oligocene or immediately before this time, and this allows the
dating of new tectonical period. Early Oligocene deposits to become tilted by dip slip faults
show that new tectonic period in the region has also continued after Oligocene.
Keywords:
03
Indexed In · Volume 148 / 2014
NEOGENE STRATIGRAPHY OF THE NORTHERN PART OF KARABURUN PENINSULA
Authors: ABSTRACTThe terrigenous Neogene lithology in north of Karaburun peninsula is represented by Lower-
Middle Miocene rock units which are cut and bounded by NW-SE trending synthetic faults.
Dominant lacustrine sedimentation (Haseki and Hisarc›k formations) of Early-Middle Miocene
period which was separated by upper and lower regional unconformities, and the Early Miocene
mafic volcanism (Karaburun volcanites) were studied within the scope of Karaburun group.
Haseki formation which reflects Early Miocene sedimentation begins with fills of alluvial fan of
the Salman member and is basically formed by algal-biostromal Yeniliman limestone and
lacustrine deposits of Aktepe member. With synsedimentary emplacement of the 1st phase
Karaburun volcanites over Yeniliman limestone platform, the dominant sequence which is
micritic limestone intercalating with diatomite of the Aktepe member was deposited in
environmental conditions deepening towards shore-face. The effectiveness of NW trending
boundary faults which gave rise to 2nd phase of the Karaburun volcanism, shaping the western
edge of Foça depression towards the end of Early Miocene has not changed the dominant
depositional environment, and lacustrine sedimentation has continued with Hisarc›k formation.
Green and fine clastic shore-face sediments (Karaba¤lar› member) of the Hisarc›k formation
which deposited the latest between Early Miocene-Middle Miocene overlie Aktepe sequence
with submarine parallel unconformity. Karaburun volcanism which is represented by high
potassium andesitic products with calc alkaline character (pyroclastics and olivine- phyric
lavas) is synchronous with sedimentation of Haseki formation and has two phases. Pyroclastic
rocks which are in facies of base-surge, air-fall and ash-fall in lesser amount were emplaced
before lava eruptions. K/Ar aged, 1st phase products, which are 18.2±1.0 my according to K/Ar
dating, are in the position of stratigraphical reference level which separates Yeniliman
limestone from Aktepe member. Second phase products are emplaced in Aktepe sequence.
Keywords:
04
Indexed In · Volume 148 / 2014
THE IMPORTANCE OF BENTHIC FORAMINIFERAS IN DETECTING FEATURES OF ECOLOGICAL AND GEOLOGICAL STRUCTURES IN EDREMIT BAY AND ON COASTAL AREAS OF D‹K‹L‹ CHANNEL (NE AEGEAN SEA)
Authors: ABSTRACTBenthic foraminiferal assemblages from the Gulf of Edremit, Lesbos Island, Alibey and
Maden islands and Dikili Bay have been investigated and various morphological
abnormalities, as well as, colored tests and large sizes have been observed. Besides,
abundance of alien species originating from tropical seas attracts attention. Interesting
togethernesses were found between different genera and species. Significant differences were
observed between the assemblages from the northwest and southeast coasts of the Gulf of
Edremit. 57 genera and 97 species were identified in the samples from the northwest coast,
where as only 32 genera and 48 species were found on the southeast coast. A diverse
foraminifer assemblage were observed around the Ayval›k-Alibey and Maden islands, with
large individual sizes, colored tests and morphological abnomalities. Abnormal
togethernesses between different genera and species were also observed in this locality.
Togethernesses between Peneroplis pertusus (Forskal)-Coscinaspira hemprichii Ehrenberg
and Peneroplis planatus (Fichtel and Moll)- Coscinaspira hemprichii Ehrenberg are
important findings in the benthic foraminiferal assemblages of Ayval›k Alibey and Maden
islands. Orange and brown coloration observed on many Peneroplis pertusus (Forskal) and
P. planatus (Fichtel and Moll) individuals is another important finding in this region.
Besides, many individuals of Peneroplis pertusus (Forskal), P. planatus (Fichtel and Moll),
Lobatula lobatula (Walker and Jacob), Cibicidella variabilis (d’Orbigny), Ammonia
compacta Hofker, A. parkinsoniana (d’Orbigny), Challengerella bradyi Billman, Hottinger
and Oesterle, Elphidium complanatum (d’Orbigny) and E. crispum (Linné) were found. The
presence of Laevipeneroplis karreri (Wiesner), Peneroplis pertusus (Forskal) and P.
planatus (Fichtel and Moll) and Sorites orbiculus Ehrenberg on the east coast of Lesbos
Island indicates the presence of hotwater springs. An abnormally large Peneroplis planatus
(Fichtel and Moll) individual were found. Besides, many Peneroplis pertusus (Forskal) and
P. planatus (Fichtel and Moll) individuals with orange-yellow tests, like the ones in Ayval›k,
were found, suggesting the presence of submarine springs with Fe content. An abnormal
Peneroplis planatus (Fichtel and Moll) individual with three different apertures was found
in Dikili samples. One of the apertures was typical of the species, whereas the other two have
the aperture characteristics of Coscinospira hemprichii Ehrenberg. The aim of our study is
to figure out the factors leading to abnormal test morphologies. It is suggested that the
benthic foraminiferal assemblages found in the study area are affected by the physical
environmental conditions such as, temperature and salinity, as well as the chemical factors,
such as radioactivity.
Keywords:
05
Indexed In · Volume 148 / 2014
GEOCHEMICAL CHARACTERISTICS OF LATERITES: THE AILIBALTALU DEPOSIT, IRAN
Authors: ABSTRACTAlibaltalu laterite deposit is located ~20 km northeast of Shahindezh, south of West-Azarbaidjan
province (NW of Iran). This deposit is developed as stratiform lenses along the boundary of
Elika dolomites (Triassic) and Shemshak sandstones (Jurassic). The distribution fashion of
minerals such as boehmite, diaspore, kaolinite, muscovite-illite, rutile, anatase, hematite and
goethite in this deposit was accompanied by the development of four types of ore facies: (1)
ferrite; (2) laterite; (3) bauxitic kaolinite; and (4) kaolinitic bauxite. Petrographically, the ores
show conglomeratic, rounded-granular, veinlet, colloform, pelitomorphic, pseudo-porphyritic,
nodular, and spongy textures. Comparison of distribution pattern of elements along a selective
profile across the deposit reveals that ferrugenization-deferrugenization mechanism played a
prominent role in distribution of Al, Si, Ti, HFSE, LREEs, HREEs, U, and Th during weathering
processes. Distribution pattern of REEs normalized to chondrite indicates a poor differentiation
of LREEs from HREEs and generation of poor negative Eu anomaly during the evolution of this
deposit. These aspects along with ratios of Al2O3/TiO2 and intense differentiation of Al from Fe
in the course of weathering processes may indicate a mafic protolith for the deposit.
Geochemical consideration of low-mobile elements demonstrates that this deposit is likely
resulted from alteration and weathering of basaltic to andesitic rocks. By regarding to the
distribution mode of elements such as Ni, Cr, Zr, and Ga within the ores, it can be deduced that
this deposit was initially formed authigenically and then later was contaminated by other rock
materials during erosion and transportation from its original place to the present site.
Keywords:
06
Indexed In · Volume 148 / 2014
TRACE/HEAVY METAL ACCUMULATION IN SOIL AND IN THE SHOOTS OF ACACIA TREE, GÜMÜfiHANE-TURKEY
Authors: ABSTRACTIn this study, heavy metal/trace element accumulation was investigated in soils along the
road passing through Gümüshane city center and shoots of 1-2 years of acacia trees
(Robiniapseudoacacia L.) grown in these soils. Heavy metal contents in soils and plants
were analyzed by Enrichment Factor (EF), Geo-accumulation index (Igeo) parameters,
and by Bio Accumulation Factor (BAF), respectively. According to geo-accumulation
index (Igeo) data, it is seen that the soil was unpolluted in terms of Cr, Co, Cu, Rb, Sr;
unpolluted to moderately polluted in terms of V, Ni and Zn; moderate to excessively
polluted in terms of As, and moderate to excessively polluted in terms of Pb. According to
EF parameters, on the other hand, it is observed that the soil was non to slightly enriched
in terms of Cr, Co, Sr and Ba; non to moderately enriched in terms of Ni and Cu; slightly
to significantly enriched in terms of Zn; significant to very highly enriched in terms of As
and slightly to over excessively enriched in terms of Pb. Although trace/heavy metal
contents of acacia shoots were usually within normal values for acacia, it was determined
that Cu, Fe, Mo, Ni, Sr and Zn concentrations were within and/or above upper limits of
normal values in certain sampling points.
Keywords:
07
Indexed In · Volume 148 / 2014
STABILITY STUDIES OF THE EASTERN SLOPES OF AFfi‹N-ELB‹STAN, KIfiLAKÖY OPEN-PIT LIGNITE MINE (KAHRAMANMARAfi, SE TURKEY), USING THE ‘FINITE ELEMENTS’ AND ‘LIMIT EQUILIBRIUM’ METHODS
Authors: ABSTRACTIn open pit mining from the safety point of view it is very important that physical and mechanical
characteristics of the dug-out materials are carefully studied, and geological and geotechnical
characteristics should also be considered in planning bench slopes of the dug-out materials. The
purpose of this study is to work out the stable slope geometry of the eastern permanent slopes in
the K›fllaköy open pit lignite mine of the Afflin-Elbistan Linyit ‹flletmesi. In the K›fllaköy open pit
mine, 35 geotechnical drillings totalling 3393.20 m were made for the geotechnical studies and
to work out slope sizing. A total of 250 vertical electrical drillings (DES) were also made to study
tectonic features and lithological changes which do not have surface expressions. All these data
have been used in this study. Design analyses showed that black coloured clay bands with high
plasticity present in between lignite horizon is the most important unit controlling slope stability.
Slope stability analyses have in general been conducted using the ‘finite elements’ and the ‘limit
equilibrium’ method to suit block sliding model and to suit different groundwater conditions. In
the analyses for the stresses affecting the slices; central part of the slice has been taken as a base
and the ‘finite elements’ stability studies have been conducted then the findings have been
compared. According to this it is understood that if stresses affecting the slices are conducted by
the ‘finite elements’ method then calculated factor of safety on the bench base would be more
from 1% to 7%, and in the slope angles it would be more from 1% to 23%.
Keywords:
08
Indexed In · Volume 148 / 2014
GEOPHYSICAL ANALYSIS AND MODELLING OF THE S‹MAV BASIN, WESTERN ANATOLIA
Authors: ABSTRACTThe various data processing techniques, to illuminate the parameters of the geological structure which are applied in gravity and magnetic potential field methods. Also edge detection procedures are in data processing techniques. In this study, 2D, 3D, inversion and asta technique is one of the new edge detection procedures were applied to clarify correlation between the Simav half graben’s deep position and geometry of the tectonic lineaments. The Asta is obtained using the tilt angle.
Keywords:
No articles match your search.