Schlumberger array, VES curve, Leachate, Transmissivity, Hydrogeological risk model.
Abstract:
This study examines the impact of solid waste on groundwater quality around three municipal dumpsites in AkwaIbom State, Nigeria using resistivity and hydrochemical data. Thirty vertical electrical soundings and ten electrical resistivity tomography data were acquired across the area using Schlumberger array. The resistivity data which were analyzed with the aid of IPI2WIN software formed the input data for estimating and modeling leachate parameters. Twelve groundwater samples collected around the area were analyzed for physico-chemical parameters using Atomic Absorption Spectrometer (AAS). The leachate parameters computed from resistivity interpretation across the area show thickness (2 to 56 m); hydraulic conductivity (6.19 to 24.7 m/day); transmissivity (96.63 to 1351.18 m²/day) and erodibility (104.36 to 2948.94 m/day). The hydrochemical analyses reveal elevated values of Total Dissolved Solids, Cadmium and high electrical conductivity within the area. The leachate migration paths trend predominantly in NW-SE and NE-SW directions at Uyo and Oron, respectively. The hydrogeological risk models reveal that the static water level crisscrosses the leachate at 35 m in Oron, while Uyo area has 25 m gap between the leachate and the static water levels. The study concludes that Oron dumpsites really contaminated the groundwater quality and makes it unfit for the dwellers.
Aylin TAN, Gündüz HORASAN, Doğan KALAFAT, Ali GÜLBAĞ
Indexed In · Volume 164 / 2021
Discrimination of earthquakes and quarries in Kula District (Manisa, Turkey) and its vicinity by using linear discriminate function method and artificial neural networks
Authors:
Aylin TAN, Gündüz HORASAN, Doğan KALAFAT, Ali GÜLBAĞ
ABSTRACT
In this study, seismic events in Kula district (Manisa, Turkey) and its vicinity have been investigated and then natural and artificial seismic activities are discriminated. Total of 77 digital vertical component velocity seismograms of seismic activities with ML≤3.5 magnitude from seismic activity catalogs between 2009 to 2014 recorded by Manisa Kula (KULA) broadband station operated by Bogazici University, Kandilli Observatory and Earthquake Resarch Institute Regional Earthquake- Tsunami Monitoring Center (RETMC) were used in this study. The maximum S-wave and maximum P-wave amplitude ratio (Ratio) of vertical component velocity seismograms and power ratio for (1 and 12 sec.) (Complexity-C) and total signal duration (Duration) of the waveform were calculated. The earthquakes and the quarry blasts have been discriminated using linear discriminant function (LDF) and Back Propagation-Feed Forward Neural Networks (BPNNs) that is one of the learning algorithms at the artificial neural networks (ANNs) methods taking correlation between these parameters into consideration. 39 (51%) of the 77 seismic activities were identified as quarry blasts and 38 (49%) of them as earthquakes LDF and ANNs methods have been applied together for the first time for Ratio-C, Ratio-logS and Ratio-duration parameter pairs with the data of Manisa and surroundings, and earthquakes and quarry blasts have been distinguished from each other. LDF and ANNs methods were compared for each pair of parameters. Both of two methods are successful but the ANNs method has higher accuracy percentage values than LDF method when there is sufficient number of data. The accuracy percentages are different for a pair of Ratio versus C, for a pair of Ratio versus logS and for a pair of Ratio versus duration, respectively.
https://doi.org/10.19111/bulletinofmre.757701
Keywords:
Manisa, Earthquake, Quarry Blast, Linear Discriminant Function (LDF), Artificial Neural Networks (ANNs).
Organic geochemical characteristics, depositional environment and hydrocarbon potential of bituminous marls in Bozcahüyük (Seyitömer/Kütahya) Basin
Authors:
Fatih BÜYÜK, Ali SARI
ABSTRACT
In this study, the geochemical properties, sedimentation conditions and hydrocarbon potential of the bituminous marls, having quite rich organic carbon content (average 9.27% TOC), composed of gray-green colored, dominant marl lithology with marl-claystone intercalation in the Bozcahüyük (Seyitömer/Kütahya) Basin has been evaluated. In this context, Rock-Eval pyrolysis, Gas Chromatography (GC), Gas Chromatography-Mass Spectrometry (GC-MS) and Modified Fischer Assay (MFA) analyses of the samples taken from the study area were performed and their organic facies have been evaluated. The marls have an excellent source rock characteristics, and include kerogen predominantly as Type I and rarely as Type II. The precipitation of organic matter took place under reducing anoxic redox conditions where oxygen was limited. Analysed samples contain terrestrial phytoclasts and palynomorphs as well as freshwater algae indicating Type-I kerogen such as Botryococcus braunii. Organic geochemical data show that the study area is deposited in the “AB” organic facies continental-marine transition zone. Carbon preference index (CPI), C₂₇, C28 and C29 steran abundance distribution of the samples as well as presence of Gamesaran as a salty environment indicator indicates that the lake enironment has been under marine environment influence from time to time and thereforethe study area have lagoon character. The average of the Tmax values of analysed samples is 432 °C and it was determined that the bituminous marls in the region could not produce conventional petroleum due to their immaturity. However, it has been evaluated that these marls have the potential to produce synthetic petroleum as the kerogen types are dominantly Type-I, TOC and HI contents are high, as well as the analyzed samples have an average of 12.60% (133 L / ton) MFA oil content.
https://doi.org/10.19111/bulletinofmre.792155
In this study, leaching experiments were performed for extraction of magnesium from a chromite beneficiation plant tailing predominantly containing lizardite. The X-ray fluorescence (XRF) and X-ray diffraction (XRD) analyzes showed that the tailing sample contains 39.3wt.% MgO and consist of predominantly lizardite mineral. Hydrochloric acid (HCl) and sulphuric acid (H₂SO₄) were used as acids separately in leaching experiments. Acid concentration, leaching temperature, leaching time, and solid ratio were investigated as leaching parameters and optimized. Maximum magnesium extraction yield was determined to be nearly 98% for both acids under optimum leaching parameters which leaching temperature was 85°C, solid ratio was 20wt.%, leaching time was 120 minutes, and acid concentrations were 6 M for HCl and 4 M for H₂SO₄. In addition, it was determined that the leaching residue as a solid state was mainly composed of amorphous silicate according to the XRD analysis. Dissolution rate data were explained using Jander equation. Mg dissolution process found to be diffusion controlled.
https://doi.org/10.19111/bulletinofmre.827630