Home›Petrographic characteristics of deep marine turbidite sandstones of the Upper Cretaceous Tanjero Formation, Northwestern Sulaimaniyah, Iraq: Implications for provenance and tectonic setting
Article Details
Petrographic characteristics of deep marine turbidite sandstones of the Upper Cretaceous Tanjero Formation, Northwestern Sulaimaniyah, Iraq: Implications for provenance and tectonic setting
BULLETIN OF THE MINERAL RESEARCH AND EXPLORATION (MTA Dergisi)
Article Details
Petrographic characteristics of deep marine turbidite sandstones of the Upper Cretaceous Tanjero Formation, Northwestern Sulaimaniyah, Iraq: Implications for provenance and tectonic setting
This study was carried out to determine the sedimentary provenance of Upper Cretaceous turbidites of Tanjero Formation. The sandstone portion of the unit has been examined based on field and laboratory studies. Seven sections were measured and described in detail on the perfectly cropped out part of the unit at the southern limb of the Sulaimaniyah Syncline. The thickness of the measured sections varies from 120 m to 192 m. The measured sections start from the top of the underlying Shiranish Formation to the syncline axis in the Tanjero Formation. For petrographic analysis sixty-nine representative rock samples were collected. Modal analysis and ternary diagrams point out that, the sandstones are calclithite (litharenite), very fine to medium grained in size consisting of chert, siltstone, mudstone, radiolarian chert and radiolarian mudstone fragments, angular to subangular in shape, very poorly to moderately sorted, transported over short distances and represent submature stage. Grain contact types and high contact index (4.7) indicate moderate to tightly packing, moderate compaction. Transported broken neritic fossil shells, moderately rounded glauconite grains, and undefinable fossils in the altered carbonate rock fragments indicate that the tectonic provenance, lithic recycle category, composed of not only the clastics as interpreted in previous studies derived from Lower Cretaceous Qulqula (radiolarian) Formation which represents deep marine, but also it revealed that a sedimentary formation must also exist in the source area, which is the Lower Cretaceous Balambo Formation.
Geochemistry of beach sands from the Bartın and Samsun-Ordu coastal districts, Northern Black Sea, Türkiye: implications for provenance
Authors:
Pelin COŞANAY, Halim MUTLU
ABSTRACT
This study aims to investigate geochemical and petrological characteristics, chemical weathering indices and provenance of the beach sands collected from 11 different sites along the coastlines of Bartın, Samsun and Ordu districts adjacent to mafic and intermediate volcanic rocks on the Pontides. Petrological findings show that the abundance of detrital quartz, feldspar and sedimentary lithic fragments increase in beach sands of the Bartın region where the SiO2 values fall in a wide range (47 to 87 wt.%). The Samsun and Ordu beach sands have moderately low SiO2 (50 to 61 wt. % and 48 to 62 wt. %, respectively) and relatively high Fe2O3 contents. LREE concentrations of investigated beach sands show enrichment patterns. Mafic minerals, especially pyroxene and magnetite grains are represented by eroded or abraded morphologies due to dissolution and erosion processes, while opaque heavy minerals show signs of recycling from basic adjacent rocks with etched to subrounded grain surface textures. The low chemical index of alteration (CIA) estimated for the beach sand samples implies the presence of fresh rock erosion along the coasts. We used magnetite to gain better understanding of the formation and origin of Fe-rich beach sands. The mineral chemistry data indicate that studied magnetites have quite similar composition and the mobility of trace elements exerts a great control on their distribution in magnetite.
Keywords:
Beach sand, Black Sea, Heavy Mineral, Mineral Chemistry, Provenance.
AN APPROACH TO PROVENANCE, TECTONIC AND REDOX CONDITIONS OF JURASSIC-CRETACEOUS AKKUYU FORMATION, CENTRAL TAURIDS, TURKEY
Authors:
Ali SARI, Derya KOCA
ABSTRACT
Late Jurassic-Early Cretaceous Akkuyu formation was deposited on marine carbonate platform in Central Tarurids. The organic material of the unit is composed of Type III kerogen which is woody material transported from the land. Late Jurassic- Early Cretaceous is an important period which great anoxic events in deep sea bottom occurred due to the primary organic productivity in global sea surface. Use of several trace elements values (Ni, V, U, Cr, Co, Th) revealed that Late Jurassic-Early Cretaceous Akkuyu formation shows oxic, disoxic and anoxic paleoredox conditions. In this period the primary productivity was considerably high. Examination of specimen derived from Akkuyu formation revealed that there exist a very good positive relationship between the major oxides of Al2O3, SiO2, Fe2O3, TiO2, and K2O. These combinations of major oxides indicate a detrital origin of source rock. Chemical weathering evaluations of Central Taurids in Jurassic-Cretaceous period indicated moderate and strong weathering of source rock. K2O/Na2O versus SiO2; SiO2/Al2O3 versus K2O/Na2O; Al2O3/ SiO2 versus Fe2O3 + MgO ve TiO2 versus Fe2O3 + MgO diagrams indicated that Akkuyu formation was deposited along active and/or passive continental margin and derived from basalt and basalt+granite mixed rocks.
Keywords:
Late Jurassic-Early Cretaceous, Provenance, Central Taurids, Redox, Major oxide
Investigation of the paleodepositional environment of the middle Miocene aged organic matter rich rocks (Tavas/Denizli/SW Turkey) by using biomarker parameters and stable isotope compositions (¹³C and ¹⁵N)
Authors:
Demet Banu KORALAY
ABSTRACT
The study area is located 45 km south of Denizli. The purpose of this study is to identify the organic geochemical properties and paleo depositional environment of organic matter rich rocks from Tavas (Denizli/SW Turkey). For this purpose, total organic carbon (TOC, wt.%) and pyrolysis, n-alkane, isoprenoid, sterane, terpane and aromatic hydrocarbon parameters have been investigated of the studied samples. In addition, scanning electron microscopy (SEM) and stable isotope (δ¹³C and δ¹⁵N) investigations were also carried out. Organic matter rich rocks which have type III kerogen have got 25.80 and 44.00 wt.% TOC content. Hydrogen index (HI, 73 and 120 mg HC/g TOC) and Oxygen index (OI, 34 and 59 mg CO /g TOC) values of samples are very low. The values of δ¹³C and δ¹⁵N show the terrestrial C3 ecosystem. The predominance of high molecular weight n-alkanes, degree of waxiness and less dibenzothiophene (DBT) concentrations indicate terrestrial organic matter. At the same time, biomarker and pyrolysis parameters indicate that the organic matter rich rocks (Tavas/Denizli) are in the immature stage. Pr/Ph, C /C homohopane biomarker ratios and C35
https://doi.org/10.19111/bulletinofmre.742127
Clay mineralogy and paleoclimatic properties of the Neogene Deposits in Sinanpaşa Basin (Afyon-Western Anatolia)
Authors:
Elif AKISKA, Zehra KARAKAŞ
ABSTRACT
The Sinanpaşa basin, one of the Neogene basins formed in the extensional tectonic regime in Western Anatolia, is located on the eastern margin of Western Anatolia basins containing different types of evaporites, lignite, uranium and clay minerals. Miocene sequence was initiated with alluvial fanfluvial units and followed by lacustrine sediments. River floodplains and lakeshore marshes locally contain economic coal levels. Since middle-late Miocene, the products of Afyon volcanism were deposited into a subaerial or a subaqueous environment alternating with lake sediments. Dominant clay minerals are illite and smectite within the sediments coexistence with the volcanics. These minerals were accompanied by chlorite, kaolinite, and zeolite in some samples. Feldspar, dolomite, thenardite, and gypsum are locally observed too. Sepiolite mineral enrichments are also noteworthy in shallow-coastal lacustrine environments where organic matter is abundant. Clay minerals are mostly detritic and developed due to the weathering of volcaniclastics and sedimentary rocks in temperate/humid climatic conditions. In particular, smectite and kaolinite minerals were formed in situ/authigenic under subaqueous conditions due to the acidic/basic character of tuffs. As a result, different clay mineral types have been developed due to the mineralogical composition of source rocks, climatic factors (humid/semi-humid, arid), paleotopography, depositional environment and diagenetic factors.
https://doi.org/10.19111/bulletinofmre.707988
Upper Cretaceous-middle Eocene aged olistrostromal pelagic units in the Biga Peninsula (NW Anatolia); Balıkkaya formation
Authors:
Serdar AKGÜNDÜZ, İzver ÖZKAR ÖNGEN
ABSTRACT
Balıkkaya formation consists of olistostromal units with a burgundy coloured mudstone, siltstone and pelagic limestone matrix containing various sizes of UpperJurassic-Lower Cretaceous limestone (Bilecik Limestone) blocks and Triassic Karakaya Complex blocks, which crop out in the west, south and southwest of Biga Town in Biga Peninsula (NW Anatolia). The matrix of Balıkkaya formation, of which age and sedimentary environment are controversial, contains Late Cretaceous (Maastrichtian) Abathomphalus mayaroensis (Bolli), Abathomphalus sp., Rosita fornicata (Plummer), Globotruncanidae, early Paleocene (Danian) Morozovella pseudobulloides (Plummer), late Paleocene (Thanetian) Morozovella velascoensis (Bolli), early Eocene Acarinina pentacamarata (Subbotina), middle Eocene Turborotalia frontosa (Subbotina), Turborotalia cerroazulensis (Cole), Orbulinoides beckmanni (Saito), Hantkenina sp. pelagic foraminifera and Radiolariafossils representing the deep marine environment. These paleontological, lithological and sedimentological data obtained from Balıkkaya formation show that Balıkkaya formation developed in a deep marine environment under tectonic control starting from Late Cretaceous and ending in early-middle Eocene. This pelagic unit indicates the presence of a extensional tectonic regime on the Biga Peninsula and the fault activity along the southeastern edge of the Thrace Basin in the Late Cretaceous-Middle Eocene time interval.
https://doi.org/10.19111/bulletinofmre.719876